User manual PHILIPS FW33

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] To skip to the beginning of the current track during playback q Press í once. Press REPEAT on the remote control repeatedly to select : "TRACK" ­ to repeat playback of the current track. "DISC" ­ to repeat playback of the current disc. "ALL DISC" or "PROGRAM" ­ to repeat playback of all available discs or programmed tracks. To resume normal playback, press REPEAT until "OFF" is displayed. REP is shown, except for REPEAT OFF mode. Random play 2 1 Press SHUFFLE on the remote control. SHUF is shown and "SHUFFLE" is displayed. All the available discs or programmed tracks (if programme is active) will be played in random order. To resume normal playback, press SHUFFLE again. Notes: ­ During programme play or shuffling mode, it is not possible to repeat playback the current disc (Repeat Disc mode). ­ Pressing the OPEN·CLOSE button will cancel all repeat and shuffling modes. 2 17 3139 115 21221 pg 001-030/C399/22-Eng 17 1/29/02, 5:55 PM English CD Operation English Programming the disc tracks Programming tracks is possible when playback is stopped. The display will show "SEARCH" until a radio station with sufficient signal strength is found. Repeat step 3 if necessary until you find the desired radio station. 2 3 To begin automatic preset from a desired preset number q Press í or ë to select the desired preset number. If a radio station has been stored in one of the presets, it will not be stored again under another preset number. 2 4 q To tune to a weak station, press à or á briefly and repeatedly until optimal reception found. Storing preset radio stations You can store up to 40 preset radio stations in the memory. Automatic Preset Programming q Plug and Play setting (refer to "Basic Functions Plug and Play"). OR Press and hold PROGRAM until "AUTO" is displayed. The system will automatically store the radio stations with sufficient signal strength, starting from all RDS stations and followed by FM, MW and LW bands respectively. Weak RDS stations may be stored in later presets. When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station (or the first available RDS station) will be played. To stop storing the automatic preset q Press PROGRAM or Ç on the system. Note: ­ If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. 1 Press TUNER to select TUNER mode. 19 3139 115 21221 pg 001-030/C399/22-Eng 19 1/29/02, 5:55 PM English V Radio Reception English Manual Preset Programming RDS RDS (Radio Data System) is a broadcasting service that allows FM stations to send additional information along with the regular FM radio signal. This additional information can contain: Station name: The radio station name is displayed. Programme type: The following programme types exist and can be received by your tuner: News, Affairs, Info, Sport, Educate, Drama, Culture, Science, Varied, Pop M, Rock M, M. O. R. [. . . ] q Use a cotton swab slightly moistened with cleaning fluid or alcohol. q You also can clean the heads by playing a cleaning tape once. CBAB C Demagnetising the heads q Use a demagnetising tape available at your dealer. Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. [. . . ]