User manual PHILIPS FW365C/22G

[. . . ] 5728-4200 Exportador: Philips Electronics HK, Ltd. País de Origen: China Nº de Serie: ______________________________ Minisistema de Audio FW-C720/21 110­127 / 220­240V~; 50­60 Hz 100 W Philips Mexicana, S. A. Industrial Vallejo Localidad y Tel: C. P. 5728-4200 Exportador: Philips Electronics HK, Ltd. [. . . ] "PLAY PROGRAM" will be displayed. q To end programming without starting playback, press Ç once . The total number of tracks programmed and the total playing time will appear on the display. Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" will appear on the display instead of the total playing time. ­ If you attempt to programme more than 40 tracks, "PROGRAM FULL" will be displayed. ­ If you press any of the DISC DIRECT PLAY buttons, the system will play the selected disc or track, and the stored programme will be ignored temporarily. The PROG symbol also will disappear temporarily from the display. It will reappear when playback of the selected disc ends. ­ During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically. 1 pg 001-027/C720-C780/21-Eng 16 6/8/01, 8:45 AM 3139 115 20592 CD Operation All the available discs and their tracks or all the programmed tracks can be played in random order. "SHUFFLE" and SHUFF will appear on the display. q The discs and the tracks will be played in random order until you press Ç. 2 To resume normal playback, press SHUFFLE again. If a radio station has been stored in one of the presets, it will not be stored again under another preset number. 2 Press and hold PROG until "AUTO" appears on the display. The system will start searching for all radio stations on the FM band, then the MW band. All available radio stations with sufficient signal strength will be stored automatically. The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. The last preset radio station will then be played when completed. To stop storing the automatic preset q Press PROG or Ç on the system. Note: ­ If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. Manual Preset Programming Press TUNER (BAND) repeatedly to select the desired waveband : FM or MW. The next available preset number will be displayed for selection. 3 Press and hold à or á until the frequency indication starts to change, then release. The display will show "SEARCH" until a radio station with sufficient signal strength is found. [. . . ] Cleaning the Heads and the Tape Paths q To ensure good recording and playback quality, clean the heads A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation. q Use a cotton swab slightly moistened with cleaning fluid or alcohol. q You also can clean the heads by playing a cleaning tape once. English CBAB C Demagnetising the heads q Use a demagnetising tape available at your dealer. Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. [. . . ]