User manual PHILIPS FW372C/22P

[. . . ] If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). ¶ As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. [. . . ] To control the current active mixer source q Press the respective source button (for example, CD, TUNER) on the remote control, then select the desired function (for example É, í, ë). For example, if CD is the mixer source and to change the disc tray, you have to press CD, then press CD 1~5 to select the desired disc tray. Notes: ­ You can only activate GAME VOLUME and MIX-IT while in game source mode. ­ If your game console is switched on, the video image will always appear on the TV even though you are not in the gameport mode. 3 Connect all the AC power cord to the power The TV's video input channel may be called AUX(iliary) IN, AUDIO/VIDEO (A/V) IN, EXT 1, etc. These channels are often near channel 00 on your TV. Or, your TV remote control may have a button or switch that chooses different video modes. ­ ­ ­ ­ ­ Windows 98 (SE)/ ME /2000 / XP Intel Pentium MMX200 or higher CD-ROM drive USB port Free hard disk space : 15 MB for the software Then perform the following steps: ­ First, select your desired language from the list. Note: ­ You are advised to read the MusicMatch tutorial before using it for the first time. Make sure the mute function on the PC is deactivated in order to ensure sound output from the Audio System. For optimum performance, the equaliser function in MusicMatch should be set to a low level. WOOx sound is designed to produce and handle high dynamic sound signals at very low frequencies. Some discs might be recorded in high modulation, which causes a distortion at high volume. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc. , as offered on the market, because they may jam the changer mechanism. ­ Do not load more than one disc onto each tray. Load discs (page 3 ­ P4) To play all discs on the disc trays q Press É . All the available discs will play once, then stop. This system is able to play : ­ All pre-recorded audio CDs ­ All finalised audio CDR and audio CDRW discs ­ MP3-CDs (CD-ROMs with MP3 tracks) To play the selected disc only q Press one of the CD 1~5 buttons on remote. The selected disc will play once, then stop. To select a desired track q Press í or ë repeatedly until the desired track is displayed. During random play (shuffle mode), pressing í will not affect the current playback. [. . . ] If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. You can choose to store only the favourite radio stations. If you want to store the radio station in another preset number, press í or ë. The preset number, radio frequency, and waveband are displayed. [. . . ]