User manual PHILIPS FW41

[. . . ] Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). ¶ As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. Connect the brown wire to the terminal marked L or coloured red. [. . . ] There are four different display modes for selection. For optimal sound listening, select only one of the following navigation sound controls at a time : MAX sound, DSC or VAC. MAX Sound MAX sound provides the best mixture of various sound features (DSC, VAC, DBB for example). Note: ­ When MAX sound is selected, all other sound navigation will switch off automatically. DSC (Digital Sound Control) The DSC feature enables you to adjust the system to suit your type of music. To listen through the headphones G Connect the headphones plug to the n socket at the front of the system. You can manually select the DBB setting that best suits your listening environment. Incredible Surround The Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect. Note: ­ Some discs or tapes might be recorded in high modulation, which causes a distortion at high volume. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc. , as offered on the market, because they may jam the changer mechanism. ­ If you attempt to programme more than 40 tracks, "PROGRAM FULL" will be displayed. ­ If you press any of the DISC DIRECT PLAY buttons, the system will playback the selected disc or track, and the stored programme will be ignored temporarily. ­ During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically. To erase the entire programme G Press Ç once when playback is stopped or twice during playback. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. All the available discs and their tracks or all the programmed tracks can be played in random order. G The discs and the tracks will be played in random order until you press Ç. When select REPEAT mode during shuffling G In normal shuffled playback "TRACK" and "ALL DISC" repeat modes are available for selection. rPT and SHUFF will appear on the display. G In programme shuffled playback "TRACK" or "PROGRAM" repeat modes are available for selection. The current track, a disc, all available discs or all programmed tracks can be played repeatedly. [. . . ] ­ During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. Before the system switches to standby mode, a countdown of 10 seconds will be displayed. The display will show the remaining time followed by the sequence of sleep timer options. Specifications and external appearance are subject to change without notice. [. . . ]