User manual PHILIPS FW45C

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] The PROGRAM flag also will disappear temporarily from the display. It will reappear when playback of the selected disc ends. ­ REPEAT DISC mode will be cancelled when program playback begins. Erasing the program (when Reviewing the program Reviewing of the program is possible only when playback is stopped. · Press í or ë repeatedly to review the programmed tracks. · Press Ç to exit review mode. Selecting a desired track Selecting a desired track when playback is stopped 1 Press í or ë until the desired track appears on the display. TM The selected track number and elapsed playing time appear on the display. Selecting a desired track during playback · Press í or ë until the desired track appears on the display. TM The selected track number and elapsed playing time appear on the display. playback is stopped) · Press Ç. TM "PROGRAM CLEARED" will be displayed. Note: ­ The program will be erased when the system is disconnected from the power supply or when the CD carousel is opened. If the CD carousel is opened, the tracks belonging to the outer two trays will be erased and the display will show "TRACKS CLEARED". Playing the program 1 Press É to start program playback. TM "REPEAT TRACK" or "REPEAT PROGRAM" will be displayed. TM The REPEAT, PROGRAM and SHUFFLE flags appear on the display. Tuning to radio stations 1 Press TUNER (BAND) to select TUNER mode. A few seconds later, the current radio frequency will be displayed. 2 Press TUNER (BAND) again to select the desired waveband : FM, MW or LW. 3 Press TUNING à or á for more than one second, then release. TM The display will show "SEARCH" until a radio station with sufficient signal strength is found. · Repeat this procedure until the desired station is reached. · To tune to a weak radio station, briefly press TUNING à or á repeatedly until the display shows the desired frequency and/or when the best reception has been obtained. Storing Preset Stations You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER (BAND). 2 Press PROGRAM for more than one second. TM The PROGRAM flag starts flashing and "AUTO" will be displayed. 18 v English C R PRO LOGIC STANDBY ON S S DOLBY B DOLBY B NR DNR RDS/ RDS CD TEXT CLOCK/ TIMER TER E EN OR M NEWS! [. . . ] · The distance to the system is too large. · Batteries are inserted incorrectly. TM Insert the batteries with their polarities (+/­ signs) as indicated. TM Replace the batteries. Timer not working. [. . . ]