User manual PHILIPS FW535C

[. . . ] Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). ¶ As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. Connect the brown wire to the terminal marked L or coloured red. [. . . ] There are four different display modes for selection. For optimal sound listening, select only one of the following navigation sound controls at a time : wOOx, DSC or VAC. Note: ­ Some discs or tapes might be recorded in high modulation, which causes a distortion at high volume. You can manually select the wOOx setting that best suits your listening environment. To listen through the headphones G Connect the headphones plug to the n socket at the front of the system. DSC (Digital Sound Control) The DSC feature enables you to adjust the system to suit your type of music. Incredible Surround The Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc. , as offered on the market, because they may jam the changer mechanism. ­ Do not load more than one disc into each tray. Load up to two discs on the individual disc trays. ­ During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically. To erase the entire programme G Press Ç once when playback is stopped or twice during playback. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. All the available discs and their tracks or all the programmed tracks can be played in random order. G The discs and the tracks will be played in random order until you press Ç. When select REPEAT mode during shuffling G In normal shuffled playback "TRACK" and "ALL DISC" repeat modes are available for selection. rPT and SHUFF will appear on the display. G In programme shuffled playback "TRACK" or "PROGRAM" repeat modes are available for selection. The current track, a disc, all available discs or all programmed tracks can be played repeatedly. "DISC" ­ to repeat the entire disc. G The selected track/disc(s)/programme will now be played repeatedly until you press Ç. [. . . ] TAPE ­ load the prerecorded tape into tape deck 2. "TIMER ON" will be displayed and followed by the set timer "XX:XX" and then the selected source. Notes: ­ If the selected source (CD) is not available when preset timer is reached, TUNER will be selected automatically. ­ During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. [. . . ]