User manual PHILIPS FW570C37

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] To skip to the beginning of the current track during playback G Press í once. Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 40 tracks can be stored in the memory in any order. 1 Load the desired discs on the disc tray (refer to "Loading Discs"). 3 Press CD (CD 1·2·3) or DISC 1/2/3 button to select a disc. 4 Press í or ë repeatedly to select the desired track. ¶ Repeat steps 3­5 to store other discs and tracks. 6 Press PLAYÉto start programme playback. "PLAY PROGRAM" will be displayed. G To end programming without starting playback, press Ç once . The total number of tracks programmed and the total playing time will appear on the display. Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" will appear on the display instead of the total playing time. ­ If you attempt to programme more than 40 tracks, "PROGRAM FULL" will be displayed. 2 To resume normal playback, press REPEAT until the "OFF" mode is displayed. Note: ­ Selecting SHUFFLE during repeat playback will cancel all repeat modes. 1 For Recording, please refer to "Tape Operation/Recording". 18 Radio Reception English Storing Preset Radio Stations You can store up to 40 preset radio stations in the memory. Automatic Preset Programming G Plug and Play setting (refer to "Basic Functions Plug and Play"). OR 1 Press TUNER (BAND) to select TUNER mode. A few seconds later, the current radio frequency will appear on the display. If a FM station is received in stereo, will appear on the display. To begin automatic preset from a desired preset number G Press í or ë to select the desired preset number. For those radio stations that had been stored in one of the preset will not be restored again to another preset number. 2 Press and hold PROG until "AUTO" appears on the display. The system will search for all RDS stations and then continue with radio stations on FM, MW and LW band respectively. All available radio stations with sufficient signal strength will be stored automatically. [. . . ] ¶ Use a cotton swab slightly moistened with cleaning fluid or alcohol. ¶ You also can clean the heads by playing a cleaning tape once. CBAB C Demagnetising the heads ¶ Use a demagnetising tape available at your dealer. Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. [. . . ]