User manual PHILIPS FW65C

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] "PROGRAM" ­ to repeat playback of the programmed tracks. To resume normal playback, press REPEAT until "REPEAT OFF" is displayed. REP is shown, except for REPEAT OFF mode. Notes: ­ During programme play mode, it is not possible to repeat playback the current disc (Repeat Disc mode). ­ Pressing theÇ button will cancel all repeat modes. 2 Selecting a desired Album/Title (MP3 disc only) To select a desired album q Press ALBUM -/+ (à or á) repeatedly. ALB starts flashing and the album's name will scroll through the display once. To select a desired title q Press TITLE -/+ repeatedly (í / ë or numeric keys 0-9). TITLE starts flashing and the title's name will scroll through the display once. Note: ­ The album and title will only be displayed once when selected. To view again, press the respective DISPLAY button on the remote control. Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order. 1 2 3 4 Load the desired discs on the disc tray (refer to "Loading discs"). Automatic Preset Programming q Plug and Play setting (refer to "Basic Functions Plug and Play"). OR 1 Press TUNER to select TUNER mode. pg 001-030/M355/22-Eng v DISC CHANGE STOP·CLEAR/DEMO STOP NEXT/ PRESETv Ç à á DIM DIM A. REPLAY RECORD PROG CLOCK·TIMER DBB DSC To begin automatic preset from a desired preset number q Press í or ë to select the desired preset number. If a radio station has been stored in one of the presets, it will not be stored again under another preset number. 2 Press and hold PROG until "AUTO" is displayed. The system will automatically store the radio stations with sufficient signal strength, starting from all RDS stations and followed by FM and MW bands respectively. Weak RDS stations may be stored in later presets. When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station (or the first available RDS station) will be played. To stop storing the automatic preset q Press PROG or Ç on the system. Note: ­ If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. 19 3139 115 21422 19 4/17/02, 10:36 AM English ZZ TE C AM IC BASS BO OS T Radio Reception English Manual Preset Programming Erasing a preset radio station 1 2 Press í or ë to select the preset radio station to be erased. Press and hold Çon the system until "PRESET DELETED" is displayed. The deleted radio frequency remains on the display. The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one. 1 2 Tune to your desired radio station (refer to "Tuning to radio stations"). [. . . ] 0. 4% DIN Specifications and external appearance are subject to change without notice. pg 001-030/M355/22-Eng 28 4/17/02, 10:37 AM Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to solve a problem by following these hints, consult your dealer or service centre. Problem CD OPERATION "UNREADABLE DISC" is displayed. Solution ­ Check if the disc is inserted upside down. [. . . ]