User manual PHILIPS FW66/25B

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] Or, you may click the Open button on the Playlist window to browse for and add music to the Playlist. Click the Save button on the Playlist, or go to the menu Options>Playlist>Save Playlist. 2 15 English USB PC Link English Notes: ­ When the USB PC Link feature is activated, Philips Sound Agent 2 will automatically be launched (if it has been successfully installed under OS Windows 2000/XP). ­ The default setting for PRESET/REVERB is MP3/ Study Room respectively. You may select from the list of different sound modes to suit your music and environment preference. Alternatively, you may select PRESET (Neutral mode) and REVERB (No Environment mode) for the minimum sound effect. Enabling digital CD audio output Before playing the CD through your PC's CD-ROM drive, it is necessary to configure your PC's hardware as follows: 1 Enter the system control panel menu and select: "System TM Hardware TM Device Manager TM CD-ROM drives TM Action-Properties TM Properties ". OR For Windows 98SE Enter the system control panel menu and select: "MULTIMEDIA" and "CD MUSIC". For Windows ME / 2000/ XP 3 4 Press à or á to select your favorite playlist, and then press í or ë until the desired track in the playlist is highlighted. Press ÉÅ to start playback. The track information will appear on the display. The display only supports English characters. During playback, ­ Press SHUFFLE to play all available tracks in the playlist in random order. ­ Press REPEAT to repeat playback of all the tracks in the playlist. 2 Check the `Enable digital CD audio for this CDROM device' setting option is selected (enabled). Notes: ­ You may need to refer to your PC's manual for correct configuration. ­ To set the clock automatically through the time information in the RDS signal, refer to "Tuner Operations ­ Setting the RDS clock". 17 English Basic Operations English 18 Dimming system's display screen You can select the desired brightness for the display panel. In any active mode, press DIM on the remote control or DIM MODE on the system repeatedly to turn on/off dim mode. DIM is shown, except for the DIM OFF mode. Incredible Surround Incredible Surround magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect. Press INC SURR to turn on / off the incredible surround sound effect. If activated, IS will appear on the display. Digital Sound Control Volume control Adjust MASTER VOLUME (or press VOL +/- on the remote control) to increase or decrease the sound level. "VOL MIN" is the minimum volume level and "VOL MAX" is the maximum volume level. To switch off the volume temporarily Press MUTE on the remote control. Playback will continue without sound and "MUTE" is displayed. To restore the volume, press MUTE again or increase the volume level. DSC provides a different type of preset sound equaliser setting. Press DSC repeatedly to select: OPTIMAL, JAZZ, ROCK or POP. Virtual Ambience Control VAC provides a different type of environmentbased equaliser setting. [. . . ] 130 W Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 25 W Eco Power Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265 x 322 x 390 (mm) Weight (without speakers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8. 6 kg Specifications and external appearance are subject to change without notice. 27 English Troubleshooting English 28 WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. [. . . ]