User manual PHILIPS FW910SR/P22

[. . . ] Mini HiFi System FW 910SR 1 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] SELECTING A DESIRED TRACK Selecting a track during playback 1 Turn the EASY JOG button (or pressí / ë on the remote control) until the required track number appears on the display. TM The selected track number and elapsed playing time appear on the display. · If you pressí once it will skip to the beginning of the current track and play the track again. Selecting a track when CD playback is stopped 1 Turn the EASY JOG button (or pressí / ë on the remote control) until the required track number appears on the display. 2 Press ENTER for confirm or PLAYÉ to start playback. English 19 Notes: ­ Unfinalizing will take approximately 2 minutes. ­ When unfinalizing a CDRW disc with text on it available, this text will be transferred to the CD recorder memory. It may occur that the text memory is full. The message MEMORY FULL/ FINALIZE CD will be displayed. You will now have to erase text, stored for other discs, or finalize another disc in order to obtain memory space. PLAYBACK PLAYING A CD 1 Press PLAYÉ to start CD playback. TM The track number and elapsed playing time of the current track appear on the display. 2 Press DISPLAY once, twice or three times to see: TM Remaining track time, total remaining time or text information respectively. 3 To interrupt playback temporarily, press PAUSE ;. 4 To continue playback, press PLAYÉ again. Note: ­ You can also key in the required track number using the numerical keys on the remote control. CD RECORDER SEARCH 1 Hold down REWIND à or FFWD á. TM The player first searches backwards or forwards at 10 times normal speed with sound at low volume, then goes to 50 times normal speed with sound muted. 2 Release the button at the desired passage. TM Playback starts at the desired passage. TM The track number, total program time and the number of programmed tracks (STEPS) appear on the display. 3 Repeat step 2 for all tracks to be programmed. 4 Press STOP Ç or PROG again on the remote control to end programming. 5 Press PLAYÉ to start programmed playback. 3 Press CANCEL to erase the track from the program. [. . . ] "DISC NOT FINALIZED" is displayed. · The CD-RW or CD-R disc is not properly recorded for the use of a standard CD player. TM Read the instruction booklet of your CDRewritable or CD-Recorder on how to finalize a recording. · The CD is badly scratched or dirty. [. . . ]