User manual PHILIPS FW930P2-2

[. . . ] To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. [. . . ] with "AUTO TRACK OFF" , the auto stop mode is disabled. FINALIZING CDR & CDRW DISCS Finalizing is a simple procedure, necessary to: ­ be able to play recordings on a CD PLAYER, ­ avoid further unwanted recordings on a disc, ­ avoid erasure of tracks on a CDRW. Notes: ­ Finalizing will take at least 2-4 minutes. During finalization , the CD recorder accepts no operating commands. UNFINALIZING CDRW DISCS For CDRW discs only If you want to make more recordings (or erasures of tracks) on a finalized disc you must unfinalize it first. TM The disc will now be unfinalized and can be recorded on again. ­ When unfinalizing a CDRW disc with text on it available, this text will be transferred to the CD recorder memory. It may occur that the text memory is full. the message MEMORY FULL/ FINALIZE CD will be displayed. You will now have to erase text, stored for other discs, or finalize another disc in order to obtain memory space. ERASING CDRW DISCS For unfinalized CDRW discs only You can erase: ­ one or more tracks from the end, ­ the entire disc. To erase one or more tracks from the end 1 Press ERASE once. TM The number of tracks and their total playing time appear on the display. 2 Select the track(s) you wish to erase by turning the EASY JOG button to the left and confirm by pressing this button. TM The selected track numbers start blinking on the track bar. TM The remaining number of tracks and the remaining playing time after erasing the selected track(s) appear on the display. TM After the selected track(s) have erased, the display shows the remaining tracks and their total playing time. TM The number of tracks and their total playing time appear on the display. SELECTING A DESIRED TRACK Selecting a track during playback 1 Turn the EASY JOG button (or pressí / ë on the remote control) until the required track number appears on the display. TM The selected track number and elapsed playing time appear on the display. If you pressí once it will skip to the beginning of the current track and play the track again. Selecting a track when CD playback is stopped 1 Turn the EASY JOG button (or pressí / ë on the remote control) until the required track number appears on the display. [. . . ] You can also clean the heads by playing a cleaning tape once. Under no circumstances you should try to repair the set yourself as this will invalidate the guarantee. Do not open the set as there is a risk of electric shock. If a fault occurs, check the points listed below before taking the system for repair. [. . . ]