User manual PHILIPS FWM15

[. . . ] Mini HiFi System FWM15 User manual Manuel d'utilisation Manual del usuario Benutzerhandücher Gebruikershandleidingen Manuale per l'utente Användarhandböckerna Brugermanual Käyttöoppaita Manual do usuário 1 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio FWM15 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] "DISC" ­ to repeat playback of the current disc. "PROGRAM" ­ to repeat playback of the programmed tracks. To resume normal playback, press REPEAT until "REPEAT OFF" is displayed. REP is shown, except for REPEAT OFF mode. Notes: ­ During programme play mode, it is not possible to repeat playback the current disc (Repeat Disc mode). ­ Pressing theÇ button will cancel all repeat modes. Random play 2 Selecting a desired Album/Title (MP3 disc only) To select a desired album Press ALBUM -/+ (à or á) repeatedly. ALB starts flashing and the album's name will scroll through the display once. To select a desired title Press TITLE -/+ repeatedly (í / ë). TITLE starts flashing and the title's name will scroll through the display once. Note: ­ The album and title will only be displayed once when selected. To view again, press the respective DISPLAY button on the remote control. Press SHUFFLE on the remote control to turn on/off the shuffle mode. If activated, SHUFFLE is shown and the repeat mode (if any) will be cancelled. Random play will start from the current disc tray. If programme mode is active, only the programmed tracks will be played in random order. Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order. 1 2 3 4 Load the desired discs on the disc tray (refer to "Loading discs"). PROG starts flashing. 17 English CD/MP3-CD Operations 5 English Press í or ë repeatedly to select the desired track. Erasing the programme Press Ç once when playback is stopped or twice during playback. PROG disappears and "PROGRAM CLEARED" is displayed. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. For MP3 disc, press ALBUM -/+ and TITLE -/+ to select the desired album and title for programming. 6 Press PROG to store the track. Repeat steps 5­6 to store other tracks. 7 To end programming, press Ç once. PROG stays and the programme mode remains active. [. . . ] You also can clean the heads by playing a cleaning tape once. Demagnetising the heads Use a demagnetising tape available at your dealer. Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. [. . . ]