User manual PHILIPS FWM375

[. . . ] Mini Hi-Fi System FWM375 Register your product and get support at www. philips. com/welcome User manual Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 3 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] Load up to two discs on the individual disc trays. To load the third disc, press DISC CHANGE. The disc tray will rotate until the empty tray is ready for loading. 2 1 1 2 15 CD/MP3-CD Operations 3 English Press OPEN·CLOSE to close the disc tray. READING is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3 disc) are shown. Notes: ­ Load the discs with the label side facing up. ­ To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding. ­ For MP3 disc, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc. Replacing discs during playback 1 2 Press DISC CHANGE. The disc tray will open without interrupting current playback. To change the inner disc, press DISC CHANGE again. "OPEN" is displayed and the disc will stop playing. The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible. Selecting a desired track/passage To search for a particular passage during playback Press and hold à or á and release it when the desired passage is located. During searching, the volume will be reduced. To select a desired track Press í or ë repeatedly until the desired track is displayed. If playback is stopped, press PLAY·PAUSE ÉÅ to start playback. Playing discs To play current disc on the disc tray Press PLAY·PAUSE É Å. All loaded discs will play once, then stop. During playback, the selected disc tray, track number and elapsed playing time of the current track are displayed. For mixed mode discs, only one mode will be selected for playback depending on the recording format. Note: ­ When playing a mixed mode disc, you may find a very short mute track inserted into the total number of tracks available in your disc. To play the selected disc only In CD mode, press CD 1/2/3. The current disc will play once, then stop. To interrupt playback Press PLAY·PAUSE É Å. The display freezes and the elapsed playing time flashes when playback is interrupted. [. . . ] 125 ­ 8000 Hz (8 dB) Signal-to-noise ratio Normal tape (type I) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 dBA Wow and flutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 4% JIS Specifications and external appearance are subject to change without notice. Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. [. . . ]