User manual PHILIPS FWM377

[. . . ] Mini Hi-Fi System FWM377 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio FWM377 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] To start programme play, press PLAY/PAUSE 2;. Notes: ­ It is not possible to create a programme with MP3 tracks from multiple CDs, or combined with normal audio tracks. ­ If you attempt to programme more than 40 tracks, "PROGRAM FULL" is displayed. ­ During programming, if no button is pressed within 30 seconds, the system will exit the programme mode automatically. To review the programme 1 2 To select your play mode, press the SHUFFLE or REPEAT button before or during playback until the display shows the desired function. Press PLAY/PAUSE 2; to start playback if in the STOP position. If you have selected SHUFFLE, playback starts automatically. To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE/ REPEAT modes are no longer displayed. Stop playback and pressí or ë repeatedly. To exit review mode, press STOP 9. 3 Erasing the programme Press STOP 9 once when playback is stopped or twice during playback. PROG disappears and "PROGRAM CLEAR" is displayed. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. For Recording, please refer to "Tape Operation/Recording". You can also press STOP 9 to cancel your play mode. Note: ­ The SHUFFLE function can be used simultaneously with PROGRAM. Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 40 tracks can be stored in the memory in any order. 1 2 3 4 Load the desired discs on the disc tray (refer to "Loading discs"). Press DISC 1/2/3 (or CD 1/2/3 on the remote control) to select a disc. In stop mode, press PROG on the remote control to start programming. Press í or ë repeatedly to select the desired track. 19 English Radio Reception English Tuning to radio stations 1 Press TUNER to select TUNER mode. "FM" or "MW" is displayed. A few seconds later, the current radio frequency will appear on the display. Press TUNER again to select the desired waveband : FM or MW. Press and hold à or á until the frequency indication starts to change, then release. The display will show "SEARCH" until a radio station with sufficient signal strength is found. [. . . ] maximum 99 Number of tracks/titles . . . . . . . . . . . . . . . . . . . . . . maximum 400 Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. [. . . ]