User manual PHILIPS FWM569-37B

[. . . ] Mini Hi-Fi System FWM569 IM Need help?Call us! Philips representatives are ready to help you with any questions about your new product. We can guide you through Connections, First-time Setup, or any of the Features. We want you to start enjoying your new product right away! RTAN PO Return your Warranty Registration Card within 10 days EE T! CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT! WH Y INS ID 1-800-531-0039 or Visit us on the web at www. philips. com E S Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Français: Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada. CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. ATENCIÓN El uso de mando o ajustes o la ejecucción de métodos que no sean los aquí descritos puede ocasionar peligro de exposición a radiación. This system complies with the FCC rules, Part 15 and with 21 CFR 1040. 10. [. . . ] While in the standby mode, pressing CLOCK·TIMER button will switch the system to the Eco Power standby mode. Note: ­ Before switching the system to the Eco Power standby or standby mode, make sure the demonstration mode has been deactivated. Setting the clock The clock can be set in either 12-hour or 24-hour mode ("11:59 PM" or "23:59" for example). 5 (00:00 / 12:00AM) 2 4 (00:00 / 12:00AM) 3 (00:00 î 12:00AM) 1, 2, 6 1 Press and hold CLK/TIMER (or CLOCK·TIMER on the main unit) until "SELECT CLOCK OR TIMER" is displayed. 2 Press ë to change the display to "CLOCK" and press CLK/TIMER (CLOCK·TIMER) again to confirm. 3 Press PROGRAM (PROG) repeatedly to change between 12-hour and 24-hour clock mode. Demonstration mode If the demonstration mode is active, whenever you switch the system to the Eco Power standby or standby mode, it will begin showing the various features offered by the system. To activate the demonstration In Eco Power standby/standby mode, press and hold Ç on the main unit until "DEMO ON" is displayed. To deactivate the demonstration Press and hold Ç on the main unit until "DEMO OFF" is displayed. 4 Press à or á repeatedly to set the hour. 5 Press í or ë repeatedly to set the minute. 6 Press CLK/TIMER (CLOCK·TIMER) to store the setting. To view the clock time in any active mode Press CLK/TIMER (CLOCK·TIMER) once. The clock is displayed for a few seconds. Notes: ­ The clock setting will be erased when the system is disconnected from the power supply. ­ The system will exit clock setting mode if no button is pressed within 90 seconds. 16 Basic Operations Dimming the system's display You can select the desired brightness for the display panel. In any active mode, press DIM on the remote control or DIM MODE on the system repeatedly to turn on/off dim mode. Digital sound control DSC provides a different type of preset sound equaliser setting. Press DSC repeatedly to select : OPTIMAL, JAZZ, ROCK or POP. Virtual ambience control VAC provides a different type of environmentbased equaliser setting. Volume control Adjust MASTER VOLUME (or press VOL +/- on the remote control) to increase or decrease the sound level. "VOL MIN" is the minimum volume level and "VOL MAX" is the maximum volume level. To switch off the volume temporarily Press MUTE on the remote control. Playback will continue without sound and "MUTE" is displayed. To restore the volume, press MUTE again or increase the volume level. Press VAC repeatedly to select : HALL, CINEMA, CONCERT, CYBER or ARCADE. Dynamic bass boost DBB enhances the bass response. Press DBB repeatedly to select : DBB 1, DBB 2, DBB 3 or DBB OFF. Some discs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume. [. . . ] 32, 44. 1, 48 kHz TUNER FM wave range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87. 5 ­ 108 MHz AM wave range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 ­ 1700 kHz Number of presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Antenna FM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]