User manual PHILIPS GC1910/02

[. . . ] νικα 44 Español 60 Suomi 73 Français 86 Italiano 99 Nederlands 112 Norsk 125 Português 137 Svenska 150 Türkçe 162 GC1900 series 6 English Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. €1) A B C ----D E F G H I J K L M N O Spray nozzle (all types except GC1903/GC1910)  Cap of filling opening Steam control  O= no steam small cloud = minimum steam large cloud = maximum steam x = Calc-clean position Spray button 8 (all types except GC1903/GC1910) Steam boost button \ (all types except GC1903/GC1905/GC1910/ GC1920) Automatic shut-off light (GC1990/GC1991 only) Temperature dial Double-Active Calc System (all types except GC1903/GC1905/ GC1910/GC1920) Temperature light Mains cord Type plate Water tank MAX water level indication Soleplate Heat-resistant storage cover (GC1981/1991 only) Important Read this user manual carefully before you use the appliance and save it for future reference. danger -- Never immerse the iron in water. [. . . ] Note: If the temperature light does not go on after you move the iron, the soleplate still has the right temperature and the iron is ready for use. Cleaning and maintenance Cleaning 1 Set the steam control to position O, remove the plug from the wall socket and let the iron cool down. 2 Pour any remaining water out of the water tank. 3 Wipe flakes and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent. 12 English To keep the soleplate smooth,  avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. 4 Clean the upper part of the iron with a damp cloth. 5 Regularly rinse the water tank with water. Empty the water tank after you have rinsed it (Fig. Double-Active Calc System (specific types only) Note: See chapter  ‘General description’ for the type numbers that are equipped with the Double-Active Calc System. The Double-Active Calc System consists of an Anti-Calc tablet inside the water tank combined with the Calc-Clean function. -- The Anti-Calc tablet prevents scale from clogging the steam vents. The tablet is constantly active and does not need to be replaced (Fig. Calc-Clean function Use the Calc-Clean function once every two weeks. If the water in your area is very hard (i. When flakes come out of the soleplate during ironing), use the Calc-Clean function more frequently. 3 Fill the water tank to the maximum level. Do not pour vinegar or other descaling agents into the water tank. 5 Put the mains plug in an earthed wall socket. 6 Unplug the iron when the temperature light goes out. 7 Hold the iron over the sink and turn the steam control to the Calc-Clean position x. €15) English 13 8 Pull the steam control slightly upwards and gently shake the iron until all water in the tank has been used up (Fig. [. . . ] Put the iron on its heel or continue ironing in horizontal position and wait a while before you use the steam boost function again. Set an ironing temperature at which the steam boost function can be used ( 3 to MAX). Put the iron on its heel and wait until the temperature light goes out before you use the steam boost function. Use the Calc-Clean function one or more times (see chapter ‘Cleaning and maintenance’, section ‘Calc-Clean function’). [. . . ]