User manual PHILIPS GC2040/70,MV

[. . . ] €1) 1 Spraydyse 2 Hette på påfyllingsåpning 3 DampbryterCALC CLEAN = kalkrensfunksjon t = tørr stryking ECO = optimal damp ; = maksimal damp = turbodamp 4 Dampstøtknapp  5 Sprayknapp 6 Temperaturbryter 7 Temperaturlampe (kun enkelte typer: med indikasjon for sikker automatisk avslåing) 8 Ledning 9 Merkeplate 10 Vannbeholder med MAX-indikator for vannivå 11 Strykesåle Bruke apparatet Fylle vannbeholderen Merk: Apparatet er utviklet for å brukes med vann fra springen. Ȯ问 （联系 问题 熨烫 或衣 1 Se tabell 1 for å sette temperaturvelgeren på riktig innstilling for plagget (fig. DampstøtfunksjonTrykk på og slipp dampstøtknappen for et kraftig dampstøt for å fjerne vanskelige skrukker  (fig. €1) 1 Spray nozzle 2 Cap of filling opening 3 Steam controlCALC CLEAN = Calc-Clean function t = dry ironing ECO = optimal steam ; = maximum steam = turbo steam 4 Steam boost button  5 Spray button 6 Temperature dial 7 Temperature light (specific types only: with safety-auto off indication) 8 Mains cord 9 Type plate 10 Water tank with MAX water level indication 11 Soleplate Using the appliance Filling the water tank Note: Your appliance has been designed to be used with tap water. [. . . ] 2 Pour any remaining water out of the water tank. 3 Wipe flakes and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent. Caution: To keep the soleplate smooth,   avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. Opbergen Note: Regularly rinse the water tank with tap water. Calc-Clean function IMPORTANT: To prolong the lifetime of your appliance and to maintain good steaming performance, use the Calc-Clean function once every two weeks. If the water in your area is very hard (i. When flakes come out of the soleplate during ironing), use the Calc-Clean function more frequently. Conservazione 1 Make sure the appliance is unplugged and the steam control is set to t  (dry  ironing). Rangement 2 Fill the water tank to the MAX indication (Fig. Do not pour vinegar or other descaling agents into the water tank. 3 Plug in the iron and set the temperature dial to MAX  (Fig. 4 Unplug the iron when the temperature light goes out. Push the steam control to the Calc-Clean position and hold it (Fig. 6 Gently shake the iron until all water in the water tank has been used up (Fig. Caution: While scale is flushed out, steam and boiling water also come out of the soleplate. 7 Set the steam control back to t (dry ironing). €2) Note: Repeat the Calc-Clean process if the water that comes out of the iron still contains scale particles. Let the iron heat up to let the soleplate  dry. 2 Unplug the iron when the temperature light goes out. 3 Move the iron gently over a piece of cloth to remove any water stains on the soleplate. 4 Let the iron cool down before you store it. [. . . ] Set an ironing temperature at which the steam boost function can be used ( 2 to MAX). use the Calc-Clean function (see chapter ‘Cleaning and maintenance’ , section ‘Calc-Clean function’). Empty the water tank and set the steam control to position ‘dry’ after use. Do not fill the water tank beyond the MAX indication. [. . . ]