Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PHILIPS GC2088/30. We hope that this PHILIPS GC2088/30 user guide will be useful to you.
Lastmanuals help download the user guide PHILIPS GC2088/30.
Detailed instructions for use are in the User's Guide.
[. . . ] Note: As indicated in the table above, do not use steam or steam boost at a low temperature, otherwise hot water may leak from the iron. 1 Consult table 1 to set the temperature dial to the appropriate
setting for your garment (Fig 4)
2 Consult table 1 to select a steam setting that corresponds to the
temperature you have set. )
3 Place the iron on its base and connect the base to a power socket. Note: Make sure that the base sits on a stable and level surface. [. . . ] 10
ENGLISH
Calc-Clean function
IMPORTANT: To prolong the lifetime of your appliance and to maintain good steaming performance, use the Calc-Clean function once every two weeks. If the water in your area is very hard (i. When flakes come out of the soleplate during ironing), use the Calc-Clean function more frequently. 2)
2 Fill the water tank to the MAX indication. 13)
Do not pour vinegar or other descaling agents into the water tank. 4 Plug in the base, put the iron on the base and let the iron heat up. 6)
5 Remove the iron when the light ring turns steady blue. 8) 6 Hold the iron over the sink. Push the steam control to the Calc-
Clean position and hold it. 14)
7 Gently shake the iron while holding the steam control until all
water in the water tank has been used up. 15) Caution: While scale is flushed out, steam and boiling water also come out of the soleplate. 2)
Note: Repeat the Calc-Clean process if the water that comes out of the iron still contains scale particles. After the Calc-Clean process
1 Put the iron on the base. Let the iron heat up to dry the soleplate. 2 Take the iron from the base when the light ring turns steady blue. ENGLISH 11
3 Move the iron gently over a piece of cloth to remove any water
stains on the soleplate. Storage
1 Set the steam control back to
. 2)
2 Pour out any remaining water from the water tank. 3 Unplug the mains cord and wind the mains cord around the base. 16) Remove iron from the base when you wind the cord, as the soleplate could still be hot. 17) 5 et the iron cool down before you store it. L
You can carry the iron and base by the iron handle. [. . . ] Only part of the light ring is lighted in safety auto-off mode. The base is not lighted up when I place the iron on it. Keep holding the steam control in the turbo steam position while using turbo steam. For other steam settings, this is not necessary. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS GC2088/30
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS GC2088/30 will begin.
