User manual PHILIPS GC2120

[. . . ] This appliance is intended for household use only. 1 Remove the mains plug from the wall socket. Do not fill the water tank beyond the MAX indication. If the tap water in your area is very hard, we advise you to use distilled water. [. . . ] Acrylic, viscose, polyamide, polyester) -1 Silk - 2 Wool - 3 Cotton, linen - If you do not know what kind or kinds of fabric an article is made of, determine the right ironing temperature by ironing a part that will not be visible when you wear or use the article. When the temperature light has gone out, wait a while before you start ironing. The temperature light will go on from time to time during ironing. Make sure that there is enough water in the water tank. Water may leak from the soleplate if the set temperature is too low (MIN to 2). To remove stubborn creases at any temperature 1 Make sure that there is enough water in the water tank. This function provides extra steam to remove really stubborn creases. The Extra Steam function only works at temperature settings between 3 and MAX. Wait at least 1 minute before using Extra Steam again to prevent water from dripping out of the soleplate. A powerful shot of steam helps to remove very stubborn creases. The Shot-of-Steam function only works at temperature settings between 2 and MAX. Keep the soleplate smooth: avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals. Regurarly rinse the water tank with water and empty it after cleaning. wind the mains cord round the cord storage facility. Always store the iron standing on its heel in a safe and dry place. Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment. If you need information or if you have a problem, please visit the Philips website at www. Com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. This chapter summarises the most common problems you could encounter with your iron. [. . . ] Please read the different sections for more details. If you are unable to solve the problem, please contact the Philips Customer Care Centre in your country. Put the iron on its heel and wait until the temperature light has gone out before you start ironing. The soleplate is not hot enough and/or the drip stop function (specific types only) has been activated. [. . . ]