User manual PHILIPS GC 3569

[. . . ] GC3569 GC3570 SmoothCare User manual 3 GC3570 9 4 10 4 11 5 13 6 13 7 14 9 39 2 GC3570 3 1 4 EN Fabric EN Linen MAX LINEN EN Cotton COTTON ••• EN Wool WOOL •• EN Silk SILK •• EN Nylon NYLON • 5 6 EN remove tough creases effectively, To pull and hold the steam control in the maximum position to generate maximum steam output. Solution Check the mains cord, the plug and the wall socket. [. . . ] Set an ironing temperature at which the steam boost function can be used ( ••• to MAX). Put the iron on its heel and wait until the temperature light has gone out before you use the steam boost function. The iron does not produce a steam boost. You have used the steam boost function too often within a very short period. There is not enough water in the water tank. Water droplets drip onto the fabric during ironing. You have not closed the cap of the filling opening properly. You have put an additive in the water tank. The set temperature is too low for steam ironing. You have used the steam boostfunction at a temperature setting below •••. Rinse the water tank and do not put any additive in the water tank. set a temperature of •• or higher. Set the temperature dial to a setting between ••• and MAX. 14 Problem EN Water drips from the Soleplate after the iron has cooled down or has been stored. [. . . ] Please note, in other steam control positions it is not necessary to continuously hold the steam control. 39 Specifications are subject to change without notice. [. . . ]