User manual PHILIPS GC4511/20 AZUR PERFORMER

[. . . ] -- Iron with extra steam: Press and hold the steam boost trigger to get more steam to remove stubborn creases. Steam boost function and vertical steaming -- Press and release the steam boost trigger for a powerful boost steam. This can be used to remove targeted stubborn creases or creases from a hanged garment. Note: The steam boost function should only be used at temperature setting between ●●● to MAX. [. . . ] Do not remove wrinkles from a garment while some one is wearing it. To prevent burns, do not direct the steam at people. Safety auto-off (specific types only) The safety auto-off function automatically switches off the iron if it has not been used for 30 seconds resting on its soleplate or 8 minutes resting on its backplate. -- To let the iron heat up again, pick up the iron or move it slightly. Cleaning and maintenance For figures, refer to the fold-out at the back of the user manual. cleaning 1 Unplug the iron and let it cool down. 2 Pour any remaining water out of the water tank from the water filling door. 3 Wipe flakes and any other deposit off the soleplate with a damp cloth and a non-abrasive (liquid)  cleaning agent. To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. Quick Calc Release IMPORTANT: To prolong the life time of your appliance and to maintain good steaming performance, use Quick Calc Release function once every 1 month. 6 Plug in the iron and let the iron heat up to dry the soleplate. 7 Unplug the iron when the temperature indicator light goes out. 8 Move the iron gently over a piece of cloth to remove any water stains on the soleplate. ENGLISH 9 Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. €If you are unable to solve the problem with the information below, visit www. Com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details). problem Water leaks from the water filling door. Water drips from the soleplate after the iron has been unplugged or has been stored. Possible cause You have overfilled the water tank. Solution Do not fill the water tank beyond the MAX indication. Pour excess water out of the water tank. [. . . ] You have put the iron in horizontal position with water still left in the water tank. Water or steam leaks from the back part of the iron. You have not locked the Quick Calc release tray properly. Take out the Quick Calc Release tray and clean it using tap water. [. . . ]