User manual PHILIPS GC4513/30

[. . . ] 2 Select Auto steam setting in the steam slider. This iron is equipped with Auto steam control. According to the temperature you select, the iron automatically provides the optimal amount of steam for the best result. 3 Put the iron on its heel and plug it in. [. . . ] Ironing with extra steam -- For extra steam during ironing, press and hold the steam boost trigger. Vertical steam -- You can use the steam boost function when you hold the iron in vertical position for removing creases form hanging clothes, curtains etc. Eco steam setting / Dry ironing -- In stead of Auto steam, you could choose ECO setting in the steam slider to save energy, yet to achieve satisfactory ironing results. -- To iron without steam, select dry setting in the steam slider. English 9 Safety auto-off (specific types only) The safety auto-off function automatically switches off the iron if it has not been used for 30 seconds resting on its soleplate or 8 minutes resting on its backplate. -- To let the iron heat up again, pick up the iron or move it slightly. 2 Pour any remaining water out of the water tank from the water filling door. 3 Wipe flakes and any other deposit off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent. To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. Quick Calc Release IMPORTANT: To prolong the life time of your appliance and to maintain good steaming performance, use Quick Calc Release function once every 1 month. Hold the iron vertically to allow small amount of water to flow out. 7 Insert the tray back to the iron and lock it. 8 Plug in the iron and let the iron heat up to dry the soleplate. 9 Unplug the iron when the temperature indicator light goes out. 10 Move the iron gently over a piece of cloth to remove any water stains on the soleplate. English 11 Storage 1 Unplug the iron and empty the water tank. 2 Wind the mains cord around the backplate of the iron and store it on its heel. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. €If you are unable to solve the problem with the information below, visit www. Com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details). Problem Possible cause Solution Wait for a few seconds before you use the steam boost function again. [. . . ] You have used the steam boost function at a too low temperature. Flakes and impurities come out of the soleplate during ironing. water leaks from the water filling door. Water or steam leaks from the back part of the iron. [. . . ]