User manual PHILIPS GC4880/20 AZUR PRO

[. . . ] Otherwise, hot water may leak from the iron. Acrylic, nylon, polyamide, polyester) Temperature Steam setting setting MAX ●●● ●● ●● ● / ECO ECO Steam boost Yes Yes No No No 1 Refer to Table 1 to set the temperature dial to the appropriate setting for your garment. 2 Refer to Table 1 to set the appropriate steam setting for your garment. Note: Make sure that the steam setting you select is suitable for the set ironing temperature. [. . . ] -- Press and release the steam boost trigger for a powerful boost of steam to remove stubborn creases. Ironing with extra steam -- For extra steam during ironing, press and hold the steam boost trigger. Vertical steam -- You can use the steam boost function when you hold the iron in vertical position for removing creases from hanging clothes, curtains etc. ECO steam setting / Dry ironing -- You could choose ECO setting in the steam slider to save energy, yet to achieve satisfactory ironing results. -- To iron without steam, select dry setting in the steam slider. ENGLISH 9 Safety auto-off (specific types only) The safety auto-off function automatically switches off the iron if it has not been used for 30 seconds resting on its soleplate or 8 minutes resting on its backplate. -- To let the iron heat up again, pick up the iron or move it slightly. 2 Pour any remaining water out of the water tank from the water filling door. 3 Wipe flakes and any other deposit off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent. To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. 6 Take out the Quick Calc Release tray, empty the water in the tray. Hold the iron vertically to allow small amount of water to flow out. 7 Insert the tray back to the iron and lock it. 8 Plug in the iron and let the iron heat up to dry the soleplate. 9 Unplug the iron when the temperature indicator light goes out. 10 Move the iron gently over a piece of cloth to remove any water stains on the soleplate. ENGLISH 11 Storage 1 Unplug the iron and empty the water tank. 2 Wind the mains cord around the backplate of the iron and store it on its heel. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. €If you are unable to solve the problem with the information below, visit www. Com/ support for a list of frequently asked questions or contact the Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details). [. . . ] Solution Wait for a few seconds before you use the steam boost function again. You have used Set an ironing temperature at which the the steam boost steam boost function can be used (●●● to function at a too low MAX). Flakes and impurities come out of the soleplate during ironing. water leaks from the water filling door. [. . . ]