User manual PHILIPS GC6602

[. . . ] ENGLISH IMPORTANT - Cleaning and maintenance Smart Calc-Clean System Your appliance has been designed with a Smart Calc-Clean system to ensure that descaling and cleaning is done regularly. This helps to maintain a strong steam performance and avoids dirt and stains coming out of the soleplate over time. To ensure that the cleaning process is performed, the steam generator gives regular reminders. [. . . ] 12 If necessary, you can repeat steps 1 to 11. Make sure that you empty the Calc-Clean container before you start the Calc-Clean process. Note: During the Calc-Clean process, clean water may come out of the soleplate if no scale has accumulated inside the iron. 8 ENGLISH Safety auto-off mode (specific types only) -- To save energy, the steam generator switches off automatically when it has not been used for 15 minutes. The ‘iron ready’ light flashes. -- To reactivate the steam generator, set the on/off switch to ‘off ’ position and then to ‘on’ position. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. € If you are unable to solve the problem with the information below, visit www. Com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country. Problem The iron does not produce any steam. Possible cause There is not enough water in the water tank. Solution Fill the water tank beyond the MIN indication. Press and hold the steam trigger until steam comes out. It may take up to 30 seconds until steam comes out. Press and hold the steam trigger until steam comes out. turn the temperature dial to 2 or higher. [. . . ] You have not pressed the Calc-Clean button for 2 seconds until the appliance started beeping. Turn the temperature dial to the desired temperature setting instead of CÁLC CLEAN. Let the iron heat up until the ‘iron ready’ light lights up steadily. [. . . ]