User manual PHILIPS HB601

[. . . ] Introduction Professional Line tanning appliance with integrated facial tanning unit The special frosted acrylic sheets merge the light given off by each of the tubes without compromising an effective tanning process, immersing users in a soft sea of light rather than surrounding them with a battery of naked tubes. The design of the couch and the canopy gives users increased freedom of movement while ensuring optimal side tanning. It comes with a control panel with special menus that give you full control of the appliance and all its features and functions. With this control panel you can determine which settings the user can adjust and to what extent. [. . . ] Time setting menu (C02) The default setting is 0, which means that users can adjust the tanning time between 0 to 24 minutes according to their own wishes. This setting allows users to set the tanning time between 1 minute and a maximum time to be set in menu C03. Users cannot set a tanning time that is longer than the maximum tanning time set, but they can set a shorter time. Note: If you have selected setting 1 in menu C02 and have accidentally limited the tanning time to 1 minute in menu C03, users will not be able to set a tanning time. Setting maximum tanning time (menu C03) This option is only available to you if you have selected setting 1 in menu C02. If you continue to hold down the O button when 40 (24 for the HB604/6000SX) has been reached, the display will start counting up from 1 again. If you continue to hold down the O button when 900 has been reached, the display will start counting up from 30 again. Note: As the facial tanner requires a cooling time of 180 seconds, we advise you not to set a shorter cooling time. Retrieving software data (menu C05) Select this menu to view the version number of the software. You may need this information when you require service. Resetting operating hour counter (menu C06) When you are in this menu, press the O button to reset the operating hour counter. b This will remove the oe from the display. 'Facial-off blocking' function (C07) The default setting is 0, which means that the 'facial-off blocking' function has not been activated. Service menus Menus C08, C09, C10, C11, C12 are service menus that can only be adjusted by staff of an authorised Philips service centre. Leaving owner's menus Return to menu C00 and press the I button to leave the menus. Cleaning Always unplug the appliance and let it cool down before you start cleaning it. Never use alcohol, methylated spirits, petrol and acetone or cleaners containing these substances to clean the acrylic sheets, as this may cause irreparable damage. Clean the outside of the appliance with a damp cloth. Clean the appliance with a damp cloth after every 250 operating hours to limit discolouration of the parts of the appliance exposed to UV. Replacement The light emitted by the tanning lamps will become less bright in time. When this happens, you will notice a decrease in the tanning capacity of the appliance. You can solve this problem by setting a slightly longer tanning time or by replacing the tanning lamps. [. . . ] O = off 1 = 50% of its full intensity 2 = full intensity If you have not set the intensity within approx. If you do not set the facial tanner, the facial tanner will burn at full intensity. Setting the body cooler 1 Select to set the body cooler. 2 Press the ¢ and £ buttons to set the fan power of the body cooler (fig. [. . . ]