Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PHILIPS HD3273. We hope that this PHILIPS HD3273 user guide will be useful to you.
Lastmanuals help download the user guide PHILIPS HD3273.
Detailed instructions for use are in the User's Guide.
[. . . ] ⷠAttention: the front grille gets hot during use. ⷠOnly touch the heater with dry hands. ⷠIf the mains cord of this appliance is damaged, it must only be replaced by Philips or their service representative, as special tools and/or parts are required. [. . . ] ⷠPrevent overheating of the appliance by keeping the air inlet and outlet grilles free: do not hang anything in front of it or above it otherwise there is a risk of fire. check the grilles from time to time for accumulated dust. If overheating should occur, the built-in overheating safety device will switch off the appliance. ⷠKeep the mains cord at a safe distance from the air inlet and outlet grilles. ⷠDo not allow aerosols, inflammable substances or materials sensitive to heat to be in the flow of hot air. The heater must not be located immediately below a socket outlet. ⷠOnly use the fan heater when it is standing in a horizontal position, on the four feet (as illustrated in fig. For your own safety and that of others: water and electricity are a dangerous combination!Do not use this heater in a bathroom or near a swimming pool. +5 °C / +41 °F) and can be used to keep the immediate vicinity of the heater free from frost. To prevent pipes from freezing, position the heater close to the pipe and select this position. Please note: When using the cool air setting >, the thermostat knob should be in its highest position. Pilot light - When the appliance is connected to the mains and switched on by selecting >, 1 or 2 the pilot light (E) will come on. - The light will stay on until the appliance is switched off by setting the selector switch (C) to position O or by disconnecting from the mains. - To indicate that the heater is still connected and in "switched-on" position (>, 1 or 2), the pilot light will remain on when the set temperature is reached and the thermostat switches the appliance off. For the same reason the pilot light will remain on when the overheating safety device switches the appliance off. Overheating safety device To prevent damage and risks due to overheating, the built-in overheating safety device cuts off the power as soon as the heating elements become too hot. If this should happen: - First ensure that it was not the thermostat which has switched off the heater. [. . . ] set the thermostat to maximum position. If the heater does not switch on, the safety device has been activated. - Remove the mains plug from the wall socket. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS HD3273
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS HD3273 will begin.
