User manual PHILIPS HD3274

[. . . ] To avoid the risk of fire and electrical shock select a safe place for the heater. Do not insert any objects into the heater. â· Ensure that children cannot play with the appliance. [. . . ] - so that switches and other controls cannot be touched by a person in the bath or shower; - outside the colour indicated areas (figs. Storing the mains cord Excess mains cord can be stored by pushing it into the storage compartment at the back of the heater. Please Note: Do not use the appliance when the mains cord is kept inside the appliance. Type HD 3274: - You can fix the mains cord by pressing it into one of the three slots (F). - Drill the holes and fix the stand / wall bracket to the wall using screws and rawlplugs (fig. - Slide the appliance correctly onto the stand / wall bracket ("Click!How to use The selector switch (C) and the thermostat knob (D) enable you to select the following functions: Type HD 3275: - Using a small screwdriver push the small lip downwards (fig. 4) and remove the heater from the stand / wall bracket (G) (fig. - You can fix the mains cord by pressing it into one of the three slots (F). - Slide the appliance correctly onto the stand / wall bracket ("Click!Both the fan and the two heating elements are switched off. ECO positon (half power): the fan and one of the two heating elements are switched on. 2 = "Hot air" for quick heating-up. Full power: the fan and the two heating elements are switched on. Thermostat knob (D) With the thermostat knob you can set a constant room temperature. When the selector switch is set to position 1 or position 2, the heater will automatically switch on (using half power or full power respectively) as soon as the room temperature falls below the set temperature. [. . . ] If necessary, clean the grilles with a vacuum cleaner. - Replace the plug into the wall socket and switch the heater on again. If the safety device again switches off the heater: - Remove the mains plug from the wall socket. [. . . ]