User manual PHILIPS HD3600

[. . . ] Congratulations on acquiring this new PerfectDraft. From now on you can enjoy the perfect taste of a draft beer at home. The system will keep your beer fresh and at exactly the right temperature so that you can always enjoy nice and cool draft beer. Once the PerfectDraft has been installed, you can pour beer at home by just pulling the tap handle. [. . . ] If the tap is only half open, the beer will be forced through the tap, causing it to foam more strongly. Allow the beer to flow down the inside of the glass. You can vary the size of the beer head by varying the angle at which you hold the glass under the spout and by varying the distance between the glass and the spout. The more upright and the closer to the spout you hold the glass, the more foam you will obtain. NB: Do not let the end of the spout touch the beer glass, the beer or the beer head, as any beer residues present on the spout will affect the forming of the beer head. 5 6 Slowly move the glass to vertical position while tapping your beer. Fill the glass until the foam almost flows over the rim of the glass. ): For the best end result, remove excess foam from the glass by moving a skimmer over the rim of the glass at an angle of 45c in one smooth movement. Never leave the skimmer lying on the worktop, but put it in a clean glass with fresh, cold water or rinse it right away. Only pass the skimmer over the glass once, as further skimming will have a negative effect on the quality of the beer head. Pick up the glass in the middle and serve the beer on the beer mat with the beer brand logo (if present on the glass) facing your guest. The way beer is poured differs from country to country. This table tells you how to pour a perfect beer in three local traditions in 10 steps. Germany and UK) Hold the glass next to the opening of the spout. Move the glass under the spout at Let the beer flow down the inside Let the beer flow down the inside an angle of approx. The beer flow down the inside of the glass. Do not let the spout touch the glass, the beer or the foam. The angle at which you hold the glass while pouring beer determines the ultimate size of the foam head. The more upright you hold the glass, the higher the foam head will be. Fill the glass until the beer almost flows over the rim of the glass. Do not let the spout touch the glass, the beer or the foam. The angle at which you hold the glass while pouring beer determines the ultimate size of the foam head. [. . . ] When the keg has already been opened, you cannot use the keg anymore. Make sure you clean the tap unit with hot water before inserting a new tube. Pour a glass of beer from the opened keg at least every 7 days. Always clean the tap unit and place a new tube into it when you install a new keg. [. . . ]