User manual PHILIPS HD4608/11

[. . . ] Warning Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. Do not use the appliance if the plug, the mains cord, the base or the appliance itself is damaged. If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [. . . ] Although scale is harmless, too much scale can influence the performance of your kettle. Descale your kettle regularly by following the instructions given in chapter ‘Descaling’. Some condensation may appear on the base of the kettle. This is perfectly normal and does not mean that the kettle has any defects. Do not operate the kettle on an inclined plane. Do not operate the kettle unless the element is fully immersed. Do not move while the kettle is switched on. To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use a soft cloth and a mild detergent. This appliance is intended to be used in household and similar applications such as: - staff kitchen areas in shops, offices and other working environments; - farm houses; - by clients in hotels, motels and other residential type environments; - bed and breakfast type environments. This device automatically switches off the kettle if it is accidentally switched on when there is no water or not enough water in it. Lift the kettle from its base and fill it with water to reset boil-dry protection. electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Before first use 1 Remove stickers, if any, from the base or the kettle. 2 Place the base on a dry, flat and stable surface. 3 To adjust the length of the cord, wind part of it round the reel in the base. Pass the cord through one of the slots in the base.  2) 4 Rinse the kettle with water. 5 Fill the kettle with water up to the maximum level and let the water boil once (see chapter ‘Using the appliance’). 6 Pour out the hot water and rinse the kettle once more. Using the appliance 1 Fill the kettle with water. You can fill the kettle either through the spout or through the open lid. [. . . ] 7 Empty the kettle and rinse it with fresh water again. Repeat the procedure if there is still some scale in the kettle. Tip:You can also use an appropriate descaler. In that case, follow the instructions on the package of the descaler. [. . . ]