User manual PHILIPS HD4624

[. . . ] ⷠUnless a specific reference is made, these instructions apply to both kettles types HD 4624 and HD 4625. ⷠThis kettle has a safety cut-out which protects it against overheating due to operation with insufficient water. If the kettle ever runs dry, switch it off and allow 10 minutes to cool down, then refill with cold water. [. . . ] 35 Iitre (up to "MIN" indication) to prevent the kettle from running dry while operating. Do not fill the kettle with more than 1. 7 litre (up to "MAX" indication) to prevent water being ejected from the spout while boiling. Switching off - The kettle will switch off automatically once the water boils (fig. - You can switch the kettle off manually at any time (fig. Some time after switching off, a click may be heard. - You can switch the kettle on again after letting it cool down for at least half a minute. cleaning · Disconnect the base unit from the mains before cleaning. Cord storage - For safety and convenience, the free length of the mains cord can be reduced by pushing the cord inside the base unit (see fig. - The minimum necessary length between the base unit and the wall socket should be left free. How to use the kettle Filling - The kettle must not be filled when placed on the base unit. - Do not forget to replace the lid after filling (fig. The outside of the appliance can be cleaned by simply wiping with a cloth moistened with soapy water. Filterline scale filter (type HD 4625) Limescale deposit Limescale is a harmless deposit which is naturally formed when hard water is heated. The amount of scale deposit (and thus the need to descale your kettle) largely depends on the hardness of the tapwater in your area and the frequency with which you use your kettle. Limescale is not harmful to your health, but it gives a powdery taste to your beverage. [. . . ] Replacement scale filter Replacement scale filters for types HD 4620-27 can be obtained from your Philips dealer under type n° HD 4966. Descaling your kettle Excessive limescale shortens the element life and may result in the kettle not operating properly. Descale using a proprietary descaling agent and follow the manufacturer's instructions. [. . . ]