User manual PHILIPS HD4882

[. . . ] Please note: The switch will only stay in the down position if the appliance is connected to the mains! important · Attention: The toaster gets hot during use. [. . . ] ⷠWhen cleaning the toaster: - First remove the plug from the mains socket. If the mains cord of this appliance is damaged, it must be replaced by Philips or their service representative, as special tools and/or parts are required. Operation (see illustrations): - Insert one or two slices of bread (fig. 1 or 2) for light browning, for toasting only one slice or for dry bread. The slices are lowered into the toaster by sliding the slide switch downwards (fig. If necessary, you can move the slide switch upwards a little further (fig. This can be helpful when removing smaller slices of bread. ⷠYou can interrupt the process of toasting by moving the slide switch upwards manually (fig. - Removing crumbs from the toaster: First remove the mains plug from the wall socket (fig. Do not shake the appliance upside down to remove the crumbs. [. . . ] The setting must not be higher than position 3. If you wish to heat-up buns or rolls on both sides, just turn them upside down after the toaster has switched off. [. . . ]