User manual PHILIPS HD4933/40

[. . . ] Note •• After you have selected the cooking time, wait for a few seconds before the induction cooker automatically confirms it. €• After the timer is set, you can touch the Timer icon (   ) again to cancel the timer. •• The timer is available from 1 minute to 2 hours. €• If the timer function is deactivated, the induction cooker can work for as long as 12 hours. [. . . ]  ) 1 Place the appliance on a dry, stable and level surface. 2 Make sure there is at least 10cm free space around the appliance to prevent overheating. 3 Always place the cookware on the cooking zone during cooking. 4 Make sure you use cookware of the correct types and sizes (see the table below). Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. d Bedienfeld e Luftauslässe f Netzkabel •• Der Timer kann zwischen 1 Minute bis zu 2 Stunden eingestellt •• Wenn die Timer-Funktion deaktiviert ist , ist der Induktionsherd 12 Stunden lang betriebsbereit. 7 Guarantee and service Recommended types and sizes of cookware Material Cookware with a bottom made of iron or magnetic stainless steel Shape Cookware with a flat bottom Size Cookware with a bottom diameter of 10-23cm, depending on the cooking mode If you need service or information or if you have a problem, please visit the Philips website at www. Com or contact the Philips Consumer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer. 4 Use the induction cooker If your induction cooker does not function properly or if the cooking quality is insufficient, consult the table below. If you are unable to solve the problem, contact a Philips service centre or the Consumer Care Centre in your country. problem The On/Off button (   ) does not respond. The appliance beeps continuously and then stops working. solution There is a connection problem. Check if the induction cooker is connected to the mains and if the plug is inserted firmly into the wall socket You may have put unsuitable cookware on the cooking plate or you may have removed the cookware from the cooking plate during cooking. Make sure the cookware is made of steel, iron or aluminum with stainless steel cladding base and has a base diameter larger than 10cm. You may have placed the cookware outside of the cooking zone. The bottom of the cookware may not be flat. If the problem still exists, take the appliance to your Philips dealer or a service center authorised by Philips. [. . . ] 2 Touch the Increase (   ) or Decrease (   ) icon to choose a power level. 3 Touch the Timer icon (   ), and the timer indicator lights up. 4 Touch the Increase (   ) or Decrease (   ) icon to adjust the time. 5 When the time has elapsed, the induction cooker stops working automatically. [. . . ]