User manual PHILIPS HD7003/10

[. . . ] It only describes how you should use the specially designed SENSEO® espresso pod holder in your SENSEO® machine. For all other instructions, please consult the user manual that came with your SENSEO® machine. There may still be some water or coffee on the SENSEO® espresso pod or in the SENSEO® espresso pod holder. Tip: Stir the SENSEO® espresso coffee before you drink it. [. . . ] it is NOT suitable for SENSEO® models HD7816HD7800. For information regarding a SENSEO® espresso pod holder for other SENSEO® models,  contact the Philips Consumer Care Centre. general description (Fig. €¯1) A Handle B Metal pod holder C Plastic coffee outlet Before first use 1 Clean the SENSEO® espresso pod holder with hot water and some washingup liquid or in the dishwasher. Now you are ready to brew SENSEO® espresso coffee with your SENSEO® espresso pod holder. Using the SENSEO® espresso pod holder Tip: For the best result,  heat-up the machine and your SENSEO® espresso glass with hot water before you brew SENSEO® espresso coffee. You can do this in two ways: 1 Put your SENSEO® espresso glass under the coffee spout and place the SENSEO® espresso pod holder in the machine without a pod. Close the lid and press the 1-cup button. 2 Rinse the glass with hot water from the tap. €¯ If you have a SENSEO® machine model HD7862 and HD7828,  you can brew SENSEO® espresso coffee with the espresso pod holder and by turning the strength selector to ( for normal coffee. €¯ If you have a SENSEO® machine model HD7860, HD7843, HD7841,  HD7840, HD7827, HD7825, HD7824, HD7822 and HD7820 you can brew SENSEO® espresso coffee with the espresso pod holder by simply following steps 1 to 9 below. If you have a SENSEO® machine model HD7852, HD7850, HD7842,  HD7835 or HD7830, you can brew SENSEO® espresso coffee in two ways: 1 Use the SENSEO® espresso pod holder and the SENSEO® espresso pod at the middle volume setting g. 2 Use a standard SENSEO® 1-cup pod holder and the SENSEO espresso pod at the middle volume setting f. 1 Fill the water reservoir with cold water up to the MAX indication and put it back onto the machine. Never pour milk, coffee, hot water or carbonated water into the water reservoir. --Make sure that you fill the water reservoir at least to the 2-cup MIN line before you start to brew coffee. A full reservoir allows you to make coffee a number of times. This makes it unnecessary to fill the water reservoir each time you want to make a glass of SENSEO® espresso coffee. , , The light in the on/off button flashes when the water heats up. -- When the light is continuously on, the machine is ready for use. [. . . ] , , The machine automatically supplies the optimal amount of water for one glass of SENSEO® espresso coffee. You can interrupt the SENSEO® espresso brewing process at any time by pressing the on/off button. If you switch the machine back on after you have interrupted the brewing process, the machine does not complete the interrupted brewing cycle. Do not remove the water reservoir during a brewing cycle, as this causes the machine to draw in air. [. . . ]