User manual PHILIPS HD7440

[. . . ] If you need information or if you have a problem, please visit the Philips website at www. Com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). [. . . ] Do not put a filter and coffee in the basket. Let the appliance run until the watertank is completely empty. - After all water is in the jug: switch off the appliance. Let the appliance cool down for at least 3 minutes before you start brewing coffee. - Fill the watertank with the desired amount of cold, fresh water (fig. The level indications on the left apply to large cups (120 ml). The level indications on the right apply to small cups (80 ml). Some versions come with a permanent filter. In this case, you do not need to use a paper filter. For large cups: use one full measuring spoon for each cup. For small cups: use one level measuring spoon for each cup. Let the appliance cool down for at least 3 minutes before you start brewing coffee again. [. . . ] If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. You can order a new jug under type number HD7955 or HD7956, depending on the type and color of your coffee maker. [. . . ]