User manual PHILIPS HD7810

[. . . ] HD7811, HD7810 Coffee Machine IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: Read all instructions before using the appliance. Care must be taken to prevent burns which can occur from touching hot parts or spilling hot liquids. 2. To protect against fire, electrical shock and injury to persons, do not immerse cord, plug, or appliance in water or other liquid. Close supervision is necessary when any appliance is used by or near children. [. . . ] Make sure the coffee pod holder is clean and the small hole in the center is not clogged (i. e. with loose coffee grounds). C C If you want to make one 4. 0 oz. cup of Senseo coffee, use the 1pod holder. If you want to make one 8. 0 oz. cups of Senseo coffee, use 2 coffee pods in combination with the deeper 2-pod holder and the °° button. 6 B Place the Senseo coffee pod(s) properly in the center of the pod holder, with the flat Senseo side up and the rounded side facing down. Use Senseo coffee pods that have been specifically developed for your Senseo coffee machine for a pure and smooth taste. 11 C Place 1 Senseo coffee pod in the 1-pod holder or C Place 2 Senseo coffee pods in the 2-pod holder. B B Make sure the coffee in the pod(s) is evenly distributed and press the pod(s) lightly into the pod holder. Never use torn pods or normal ground coffee, as this could cause the machine to become blocked. C CK CLI 7 Close the lid and lock the lever. Always check if the lid is properly locked. The lever must be pushed down until it snaps home with a click. Never start brewing coffee with the lid open!The lid must be properly closed. C Place one cup, two cups or one mug under the outflow openings. If you are using cups, make sure they have a capacity of app. If you are using a mug, make sure the mug has a capacity of app. Do not use cups or mugs that are too large, as they will cause the coffee to get cold more quickly. If using one cup or one mug, be sure to position the cup or mug right under the coffee outflow unit with its two openings 8 C Press the button indicating the number of cups of Senseo coffee you want to brew. mug The Senseo coffee machine starts brewing. - The machine automatically supplies the optimal amount of water. - You can interrupt the brewing process at any time by pressing the on/off button I. If you switch the machine back on after having interrupted the brewing process, the machine will NOT complete the interrupted brewing cycle. 9 12 Do not remove the water reservoir during a brewing cycle, as this will cause the machine to draw in air. When this happens, the next cup will only be partly filled. If the mug/cups is/are half full when the machine stops brewing, there was not enough water left in the water reservoir to brew two cups or one mug. Refill the water reservoir and press button ° to fill up the two cups or mug. Be careful when you do this; make sure that the rubber sealing ring does not get stuck under the edge of the metal distribution disk. If it does, the coffee machine will start leaking! Descaling Regular descaling will prolong the life of your Senseo coffee machine and will guarantee optimal brewing results for a long time. [. . . ] Make sure you have used the correct number of pods and pressed the right button. Use 1 pod in combination with the 1-pod holder and the ° button. Use 2 pods in combination with the 2-pod holder and the °° button; Check if the coffee pod(s) has/have been placed properly in the center of the pod holder, to prevent water from escaping along the edge of the pod(s). When you are using two coffee pods on top of each other, make sure that the flat Senseo sides of both pods are facing up and rounded sides are facing down. Press the pods lightly into the pod holder; Make sure you have not used the same pod twice by accident. [. . . ]