User manual PHILIPS HD7817

[. . . ] 5 ENGLISH Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. With SENSEO®, you can enjoy a perfect cup of coffee with a delicious crema layer whenever you feel like it. Each cup is freshly brewed, so you’re always sure of a pure and round taste. [. . . ] , , The coffee machine is ready for use when the indicator light lights up continuously. Placing a pod holder 1 Move the lever upwards to release and open the lid (Fig. €¯10) 4 Clean the coffee spout, the pod holders, the drip tray, the cup tray and the water reservoir in hot water, if necessary with some washing-up liquid, or in the dishwasher (Fig. 5 To prevent clogging, clean the pod holders regularly with hot water, some washing-up liquid and a washing-up brush. If you have used the 2-cup pod holder to brew cappuccino or hot chocolate, make sure to clean it thoroughly immediately after use to remove any milk residues (Fig. , , Place 1 SENSEO® coffee pod in the 1-cup pod holder ° to brew one cup of coffee. €¯11) , , Place 2 SENSEO® coffee pods in the 2-cup pod holder °° to brew two cups of coffee. €¯12) Note: Use SENSEO® coffee pods from Douwe Egberts specially designed for your SENSEO® coffee machine for a full and round taste. Note: Make sure the pod holder is clean and the sieve in the centre is not clogged, e. Note: Make sure the coffee in the pod(s) is evenly distributed and press the pod(s) lightly into the pod holder. Always make sure the lid is properly locked. Push down the lever until it snaps home with a click. The cups you use should have a capacity of at least 150ml. Do not use cups that are too large, as they cause the coffee to get cold more quickly. 5 Press the button that indicates the number of cups of SENSEO® 4 Place one cup or two cups under the spout openings. 3 Close the lid and lock the lever (Fig. 2 Place the SENSEO coffee pod(s) properly in the centre of the pod ® Note: Use the clogged pod holder in the machine during descaling to clean it even more effectively. 6 Clean the water distribution disc with a moist cloth (Fig. Make sure that the rubber sealing ring does not get stuck under the edge of the water distribution disc. If it does, the coffee machine starts to leak. Flushing the coffee machine If you have not used the coffee machine for three days, flush it with clean cold water before you use it again. Flush the machine in the following way: 1 Fill the water reservoir with clean cold water up to the MAX indication and put it back onto the machine. [. . . ] The coffee machine produces less coffee than before. Perhaps the sieve in the centre of the pod holder is clogged. Perhaps a used If this is the case, remove the used coffee pod is pod. sticking to the water distribution disc. [. . . ]