User manual PHILIPS HD8327

[. . . ] Register your product and get support at The coffee machine is suitable for preparing 1 or 2 cups of espresso coffee and is provided with a swivel steam and hot water wand. The controls on the front side of the machine are labelled with easy-to-read symbols. The machine has been designed for domestic use and is not suitable for professional, continuous use. Incorrect use not in accordance with the intended purposes; · Repairs not carried out in authorised service centres; · Tampering with the power cord; · tampering with any part of the machine; · Use of non-genuine spare parts and accessories; · failure to descale the machine and storage at temperatures below 0°C. [. . . ] To end the operation, set the selection knob (17) to the " " position and close the knob (3) by turning it clockwise. 2) - Fill the tank with fresh drinking water. 13-14) - Insert the filter holder into the brew unit (8) from the bottom and turn it from left to right until it locks into place. Fill the tank again and wait until the "machine ready" light (20) turns on. 19) - Remove the filter holder from the unit by turning it from right to left and rinse it with fresh drinking water. The machine is now ready; please see related sections for operating details on how to brew coffee and dispense steam. During the coffee brewing it is forbidden to remove the pressurized filter holder by manually turning it clockwise. During this operation, the "machine ready" light (20) may flash; this is to be considered as a standard and not a faulty operating mode. Before using the machine, make sure that the hot water/ steam knob (3) is closed and that there is enough water in the tank. press the ON/OFF button (11) and switch it to the "I" position. Wait until the "machine ready" light (20) turns on. The machine is now ready for coffee brewing. 7) - Insert the filter (14) in the pressurized filter holder (12); the filter is already inserted when using the machine for the first time. 13) - Insert the filter holder into the brew unit (8) from the bottom. 14) - Turn the filter holder from left to right until it locks into place. This movement guarantees proper filter holder performance. 16) - Preheat the pressurized filter holder by switching the selection knob (17) to the " " position until some water spills out of it. This is to be done only for the first coffee brewing. 19) - Remove the filter holder from the machine by turning it from right to left and pour out any water left. As the machine is fitted with the special filter (14), there is no need to change the filter to make one or two coffees. Remove any coffee residues from the rim of the filter holder. 13) - Insert the filter holder (12) into the brew unit (8) from the bottom. [. . . ] 10 Switch on the machine by pressing the ON/OFF button (11); turn the selection knob (17) to the " " position and, by means of the filter holder, dispense the whole content of the tank. 22) - Turn the selection knob (17) to the " " position and dispense the whole content of the tank by means of the steam / hot water wand. 13 Repeat the operations from point (8) once again for a total of 4 tanks. 19) - Remove the filter holder from the unit by turning it from right to left and rinse it with fresh drinking water. [. . . ]