User manual PHILIPS HD 8747

[. . . ] EC DECLARATION OF CONFORMITY YEAR 09 EC 2006/95, EC 2004/108, SAECO INTERNATIONAL GROUP S. P. A Via Torretta, 240 - 40041 Gaggio Montano (Bo) - Italy declare under our responsibility that the product : AUTOMATIC COFFEE MAKER SUP 033R to which this declaration relates is in conformity with the following standards or other normative documents : · Safety of household and electrical appliances - General requirements EN 60335-1(2002) + A1(2004) + A2(2006) + A11(2004) + A12(2006)+ A13(2008) · Safety of household and electrical appliances - Part 2-15 Particular requirements for appliances for heating liquids EN 60335-2-15(2002) + A1(2005) + A2 (2008). · Household and similar electrical appliances - Electromagnetic fields - methods for evaluation and measurement - EN 62233 (2008). · Household and similar electrical appliances - safety - Part 2-14 Particular requirements for kitchen machines EN 60335-2-14 (2006) + A1 (2008). · Electromagnetic compatibility (EMC) - Requirements for household appliances , electric tools and similar apparatus - Part 1 - Emission EN 55014-1 (2006). [. . . ] · Place 1 or 2 cups under the dispensing spout. · To brew coffee, press and release: the " " button for an espresso coffee; the " " button for a long coffee. · To dispense 1 cup of coffee, press the button once. To dispense 2 cups of coffee, press the button twice. In this operating mode, the machine automatically grinds and doses the correct amount of coffee. Brewing two coffees requires two grinding cycles and two brewing cycles, automatically carried out by the machine; this option is indicated by the " " light being constantly on. · After the prebrewing cycle, coffee begins to dispense out of the dispensing spout. · Coffee brewing stops automatically when the pre-programmed level is reached; however, it is possible to interrupt coffee brewing by pressing the button initially pressed. The machine is adjusted to brew a true Italian espresso coffee. This feature may slightly lengthen the brewing time, allowing the intense flavor of the coffee to develop fully. Steady on Steady on Warning: Dispensing may be preceded by short sprays of hot water, and scalding is possible. The hot water/steam wand may reach high temperatures. Do not touch it with bare hands; use the appropriate handle only. · Before dispensing hot water, check that the green temperature " " light is steady on. When the machine is ready, proceed as follows: · Place a container under the hot water / steam wand (Pannarello, if supplied); · Turn the control dial clockwise to set it to the " " position. · Fill the cup with hot water to the desired level; to stop hot water dispensing, turn control dial counter-clockwise back to the " " position. The machine returns to the normal operating mode. Occasionally, after turning the control dial, hot water may not be dispensed and the " " light may blink slowly. To obtain a flow of hot water, simply wait until the " " light stops blinking and remains steady. Steady on English DISPENSING HOT WATER · 12 · STEAM DISPENSING / CAPPUCCINO BREWING Steam may be used to froth milk for a cappuccino, as well as to reheat other beverages. Warning: Dispensing may be preceded by short sprays of hot water, and scalding is possible. The hot water/steam wand may reach high temperatures. Do not touch it with bare hands; use the appropriate handle only. Important Note: Immediately after using the steam to froth the milk, clean the steam wand (or Pannarello when provided). [. . . ] Descale the machine. Pannarello is dirty (if supplied). (See note) The machine takes a long time to warm up or the amount of water dispensed from the wand is too little. The coffee blend is unsuitable, the coffee is not freshly roasted or the grind is too coarse. The machine's water circuit is obstructed by limescale build-up The brew group is out of place. [. . . ]