User manual PHILIPS HD8761/11 QUICK STARTING GUIDE

[. . . ] It is not intended for use in environments such edge of a table or counter, or touch hot suras staff kitchens of shops, offices, farms or faces. € Never direct the hot water jet towards body • Do not place the machine on a hot plate, directly next to a hot oven, heater or similar parts (danger of burning). Use handles and • Only put coffee beans into the coffee bean knobs. If ground coffee, instant coffee or • Remove the mains plug from the wall sockany other substance is put in, it may damet: age the machine. [. . . ] IT EN MANUAL RINSE CYCLE CICLO DI RISCIACQUO MANUALE 2 1 Place a container under the Press the button to select pre-ground coffee function. When the dispensing has finished, empty the container. Repeat the step 1 to step 2 twice, then continue with step 4. EN IT MAX Dispense water until the no Place a container under the Press the button to start dispensing hot water. At the end, fill the water tank again up to the MAX level. At the end of the process, remove the cup. al termine del processo , rimuovere la tazzina. IT EN MY FAVORITE ESPRESSO IL MIO ESPRESSO IDEALE OK Select the desired aroma by Press and hold the button until the MEMO icon is dibutton. Note: To programme long coffee, press and hold the button until the MEMO icon is displayed. The machine is program- Wait until the desired ming. Com/support Instructions 13 Istruzioni English Italiano ADJUSTING THE CERAMIC COFFEE GRINDER REGOLAZIONE MACINACAFFÈ IN CERAMICA The grinder adjustment knob, inside the coffee bean hopper, MUST only be turned when the ceramic coffee grinder is working. If coffee is watery, change the grinder setting. Dispensing may be preceded by small jets of hot water. Fill 1/3 of a container with Utilizzare solo la speci- cold milk. EN Immerse the Classic Milk Press the Frother in the milk. IT Froth the milk by gently swirling the container and moving it up and down. Dispensing may be preceded by small jets of hot water. Press the button to start To stop the hot water dispensing press the Remove the container. When the “CALC CLEAN” symbol is displayed, you need to descale the machine. Not doing this will ultimately make your appliance stop working properly. In this case repair is not covered under your warranty. EN IT EN IT The descaling cycle (A) and the rinse cycle (B) may be paused by pressing the “ ” button. [. . . ] Quotidiana Settimanale Remove the upper part of the Classic Milk Frother from the hot water/steam wand. Clean the hot water/steam wand with a wet cloth. The machine is performing the rinse cycle. EN You need to replace the “INTENZA+” filter. [. . . ]