User manual PHILIPS HD9382/20

[. . . ] -- Do not place the appliance on an enclosed surface (e. A serving tray), as this could cause water to accumulate under the appliance, resulting in a hazardous situation. -- Unplug the appliance and let it cool down before you clean it. Do not immerse the kettle or base in water or any other liquid. [. . . ] The actual temperature may deviate slightly from the indicated temperature. -- There are 4 buttons that represent different hot drinks: 1 Green/White tea: 80°C 2 Oolong tea: 90°C 3 Instant Coffee: 95°C 4 Black tea/Boil: 100°C -- Press the power button ( ) to turn on the kettle. -- Press any temperature button to start the heating. -- While the kettle heats the water to the preset temperature, the light ring around the selected button pulsates slowly until the water has reached the preset temperature. -- When the water has reached the preset temperature, you hear a signal. The light ring around the selected button stops pulsating and lights up continuously. -- After 2 minutes, if you haven’t used the hot water, a reminder signal will beep. Note: You can select a different type of hot drink by pressing a different button while the kettle is operating. This is only possible if the temperature of the water is still below the temperature of the newly pressed button. Note: You can deactivate the appliance by pressing the power button or by removing the kettle from the base. Keeping water warm at the preset temperature You can use the keep-warm function to keep water warm at the preset temperature for 30 minutes. To activate the keep-warm function, press the KEEP WARM button ( ) after you have pressed the desired preset button. The light ring around the KEEP WARM button lights up continuously. When the water has reached the preset temperature, the light ring around the KEEP WARM button pulsates slowly for 30 minutes. If you want to cancel the keep-warm function, press the KEEP WARM button or remove the kettle from the base. Note: The keep-warm function keeps the water warm for 30 minutes. After this, you hear a signal and the kettle switches off automatically. Note: If you press another preset button while the keep-warm function is activated, you need to reactivate the keep-warm function as well. Descaling the kettle Depending on the water hardness in your area, scale may build up inside the kettle over time. Scale may affect the performance of the kettle. Descale the kettle regularly by following the instructions in this user manual. We recommend the following descaling frequency: -- Once every 3 months for soft water areas (up to 18dH). [. . . ] The kettle activated the boil-dry protection. For details, see section ‘Boil-dry protection’ in chapter ‘Important’. I try to switch on the The kettle activated the boil-dry protection. Kettle, but it switches off For details, see section ‘Boil-dry protection’ in chapter automatically. [. . . ]