User manual PHILIPS HF-8440

[. . . ] - Do not use the adapter, the charging case or the massagers if they are damaged. - Regularly check the massagers , the charging case and the adapters for possible damage. If any of these items is damaged in any way, stop using it and consult our website www. Do not cut off the adapter to replace it with another plug, as this causes a hazardous situation. [. . . ] The massagers switch off automatically when you place them in the charging case and close the lid. Note:The charging case does not work when the massagers are placed incorrectly or when the lid is open. , The charging light on the charging case startsflashingtoindicatethatthemassagersare being charged. Note:When you charge the massagers for the first time or after a long period of disuse, it may take a few minutes before the charging light starts flashing. Note:The massagers may produce a smell the first few times you charge them. , When the massagers are fully charged, the charging light goes out. Using the appliance Note:The massager shown in the figures is the female massager. the male massager has the same buttons and functionalities. Thoroughlycleanthemassagersbeforefirstuse, after every use and when you use them on another body area, to reduce the risk of infection (see chapter `Cleaning'). 1 Press any button to switch on the massager. Note: If the massager has not been used for more than 7 days, you can only switch it on by pressing the + button. , The massager starts operating in the default mode (mode 1) and at the default vibration speed. Tip:You can adjust the speed and select a mode once you have familiarised yourself with the options available. 3 Press the increase or decrease button one or more times to adjust the vibration speed to your own preference. 4 You can hold the massager in different ways. Tip:You can also use the massagers in combination with a water-based or silicone-based lubricant or massage oil. Do not use scented and/or alcohol-based lubricants or massage oils, as they may cause damage. Tip:You can also use the massagers in a wet environment, e. Do not immerse the massagers for more than one hour. 5 To switch off the massager , press and hold the mode selection button or the decrease button. Travel lock It is possible to lock the massager, for example if you are going to travel. The travel lock prevents the massager from being switched on by accident. [. . . ] It takes 4 hours to charge the massager fully. When fully charged, the massager has an operating time of up to 5 hours, depending on the selected vibration mode and speed (see chapter `Charging'). deactivate the travel lock (see chapter `Using the appliance'). Let the appliance cool down to room temperature before you continue using it. [. . . ]