User manual PHILIPS HI108

[. . . ] Keep the soleplate smooth: avoid hard contact with metal objects. 3 Clean the upper part of the appliance with a damp cloth. Storage 1 Remove the mains plug from the wall socket. . Important Read these instructions for use carefully before using the appliance and save them for future reference. . Check if the voltage indicated on the type plate corresponds to the local mains voltage before you connect the appliance. [. . . ] Always place and use the iron and the stand, if provided, on a stable, level and horizontal surface. This appliance is intended for household use only. . 2 Wind the mains cord round the cord storage facility (fig. 4 Always store the iron standing on its heel in a safe and dry place (fig. Environment Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment (fig. . Guarantee & service If you need information or if you have a problem, please visit the Philips website at www. philips. com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. Frequently asked questions This chapter lists the questions most frequently asked about the appliance. If you can't find the answer to you question, please contact the Customer Care Centre in your country. . Before first use 1 Remove any sticker or protective foil from the soleplate and clean the soleplate with a soft cloth. The iron may give off some smoke when you use it for the first time. This will cease after a short while. Preparing for use . Question Answer Why does the soleplate stay There may be a connection problem. Check the cold, even though I have plugged mains cord, the plug and the wall socket. Set the temperature dial to the required ironing temperature (see section 'Setting the temperature'). 1 A B C D Setting the temperature 1 Put the iron on its heel. 2 Set the temperature dial to the required ironing temperature (fig. [. . . ] Using the appliance 1 Set the temperature dial to the recommended position. See chapter 'Preparing for use'. . G 2 3 F 4 E 5 2 HI105: let the iron to heat up for two minutes before you start ironing. 3 HI114/HI108: the temperature light goes on to indicate that the iron is heating up (fig. [. . . ]