User manual PHILIPS HI510

[. . . ] Always place and use the iron and the stand, if provided, on a stable, level and horizontal surface. Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. Before first use intended for household use only. this appliance is 1 Remove any sticker or protective foil from the soleplate and clean it with a soft cloth. [. . . ] Acrylic, nylon, polyamide, polyester) -1 Silk - 2 Wool - 3 Cotton, linen If you do not know what kind(s) of fabric(s) an article is made of, determine the right ironing temperature by ironing a part that will not be visible when you wear or use the article. Start ironing when the amber temperature light has first gone out and then goes on again. The light will go on from time to time during ironing. Steam ironing is only possible at higher ironing temperatures. 1 Make sure that there is enough water in the water tank. Turn the temperature dial to a position between 2 and MAX. Make sure that the steam setting you select is suitable for the ironing temperature selected: - 1 - 3 for moderate steam (temperature settings 2 to 3) - 3 - 6 for maximum steam (temperature settings 3 to MAX) You can use the spray function to remove stubborn creases at any temperature. 1 Make sure that there is enough water in the water tank. The shot-of-steam function can only be used at temperature settings between 2 and MAX. Wait 4-5 seconds before using the shot-of-steam function again to avoid spluttering. The shot-of-steam function can also be used when you hold the iron in vertical position. Unplug the iron when the light has gone out. 8 Release the self-clean button as soon as all the water in the tank has been used up. - Put the plug in the wall socket and let the iron heat up to allow the soleplate to dry. - Unplug the iron when the light has gone out. - Move the iron gently over a piece of used cloth to remove any water stains that may have formed on the soleplate. - Let the iron cool down before you store it. Wind the mains cord around the cord storage facility and fix it with the cord clip. Always store the iron standing on its heel in a safe and dry place. Do not throw the appliance away with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment. If you need information or if you have a problem, please visit the Philips website at www. [. . . ] no turbo steam (types HI545/35/29/28/25 only) or no (vertical) shot of steam. The function has been used too often within a very short period. select an ironing temperature that is suitable for steam ironing (2 to MAX). Put the iron on its heel and wait until the light has gone out before you start ironing. [. . . ]