User manual PHILIPS HOME CINEMA RECEIVER PACKAGE MX1015D37

[. . . ] 1-800-531-0039 Thank you for making Philips a part of your home! LX7000SA LX8000SA E S 1 Hook Up Guide LX8000SA · LX7000SA 12nc: 3139 115 21801 Helpful Hints: You can listen to normal TV broadcast channels through the home cinema sound system from such an audio connection. When listening to TV programmes, you have to set the DVD system to TV/AV mode in order for the sound to be heard. This Hook Up Guide shows the basic setup of your DVD home cinema system and the connections to your TV! Connecting Speaker Cable 0. 3 (8m 1" m) white AUDIO OUT L S-VIDEO IN R a b c red Helpful Hints: If your TV is not equipped with an S-VIDEO connector, connect your TV through the corresponding CVBS A or Pr/Cr Pb/Cb Y B output. Notes: On the TV - The S-Video In jack may be labeled as Y/C, S-Video or S-VHS. - The CVBS jack may be labeled as Video, Composite or Baseband and is usually yellow. [. . . ] q When playing an SACD, press SURROUND to select: SACD multi channel or SACD stereo. The clear voice sound feature enhances the center and surround sound speakers. q Press VOICE on the remote control to switch on or off the clear voice effect. Volume control Adjust VOLUME button (or press VOL +/-) to increase or decrease the volume level. For Philips TVs only Multichannel ­ Dolby Digital Dolby Digital (also known as Dolby 5. 1) and MPEG Multichannel deliver a realistic and dynamic sound similar to theater and cinema. It requires connection of all five speakers (front left/right, center, surround left/right) and subwoofer for correct Dolby Digital sound reproduction. Each channel plays its own unique role in providing the right sound. Front left, center and right join two surround speakers to reproduce high, mid and bass frequencies in five full-range channels of surround. Bass rumble, explosions and low frequency effects you feel are delivered through the subwoofer. A large number of DVD discs have been recorded in Dolby Digital. ­ DTS Surround DTS Surround is a cinema surround sound format that offers superior digital audio performance. DTS offers more clarity and definition especially for higher tones. The better sound quality is a result of the limited sound compression (3:1 instead of 11:1 for Dolby Digital) and the 20-bit resolution. ¶ On hybrid discs (with SACD and CD layers), the system will only play the SACD layer. AUDIO CD TRACKS 5 PressÉ to start playback. Å q For SACDs, VCDs and CDs, playback will stop at the end of the disc. Notes: ­ Your DVD system will not play discs that have a region code different from the region code of your DVD system. ­ If the inhibit icon (Ä) appears on the TV screen when a button is pressed, it means the function is not available on the disc you are playing. To interrupt playback 1 PressÉ . Å The picture freezes and the sound will be muted. 2 To resume playback, pressÉ again. Å To stop playback q Press Ç. 1 2 3 4 5 6 7 8 9 10 11 12 . . . q Audio CDs contain only Tracks. OPERATIONS You can only select the repeat play mode during playback. q Press RESUME to resume playback from the point at which it stopped (it is only applicable for the last five DVD/VCD played). For DVD - Repeat chapter/title/disc q Press REPEAT repeatedly to select the following : "REPEAT CHAPTER" ­ repeat the current chapter. "REPEAT TITLE" ­ repeat the current title. "REPEAT DISC" ­ repeat the entire disc. To cancel the resume mode and start playback from the beginning 1 In stop mode, press Ç. 2 PressÉ to start playback from the beginning. Å Note: ­ Resume feature is also applicable to VCDs and SVCDs. ­ The resume option may not be available on some discs. For SVCD/VCD/SACD/CD - Repeat track/disc q Press REPEAT repeatedly to select the following : "REPEAT TRACK ­ repeat the current track. [. . . ] Place the DVD system as far as possible from electric devices with interference. Make sure you connected positive wires to + jacks and negative wires to - jacks. ­ Hold down PROG button on the system until "TRAY UNLOCK?" appears on the display, then hold down PLAY/PAUSE button on the system. ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ The remote control does not function. The display is dark. [. . . ]