User manual PHILIPS HP4991

[. . . ] Moreover, this hairdryer has features that protect your hair from damage and give you the reassurance of the best results. The ion function produces negatively charged ions, which neutralise static and prevent flyaway hair, leaving it frizz-free, manageable and shiny. Next to the ion function, this hairdryer contains a ceramic element that produces a gentler warmth than a conventional heating element and thereby helps to protect your hair from overdrying. A B C D E F G H I General description (Fig. [. . . ] Caution For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current not higher than 30mA. If the appliance overheats, it switches off automatically. Unplug the appliance and let it cool down for a few minutes. Before you switch on the appliance again, check the grilles to make sure they are not blocked by fluff, hair, etc. Always switch off the appliance before you put it down, even if it is only for a moment. Do not wind the mains cord round the appliance. You may notice a characteristic odour when you use this hairdryer. This odour is caused by the ions that are generated and is not harmful to the human body. Do not probe the ion generator with metal objects. Do not use the appliance on artificial hair. This appliance is only intended for drying scalp hair. 6 - Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid. Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Using the appliance Drying 1 Put the plug in the wall socket. 2 Settheairflowswitchtothegentleorhighsettingtoswitchonthe - - appliance. 3 Set the temperature switch to the cool, warm or hot setting. 4 Switch the ion function on or off with the ion slide switch. The ion function reduces frizz and static electricity and is particularly suitable for almost-dry hair. [. . . ] Troubleshooting If problems arise with your hairdryer and you cannot solve them with the information below, please contact the nearest Philips service centre or the Philips Consumer Care Centre in your country. Problem Cause Solution The appliance does not work at all. Perhaps the socket to which the appliance has been connected is not live. The appliance may have overheated and switched itself off. Make sure the socket is live. Unplug the appliance and let it cool down for a few minutes. Before you switch on the appliance again, check the grilles to make sure they are not blocked by fluff, hair etc. Make sure that the voltage indicated on the type plate of the appliance corresponds to the local mains voltage. [. . . ]