User manual PHILIPS HP6443

[. . . ] If the adapter of this appliance is damaged, it may only be replaced with an adapter plug of the original type. Turn to your Philips dealer or the Philips organisation in your country for replacement. Do not expose the appliance to temperatures lower than 5°C or higher than 35°C. Do not use the epilating head on irritated skin or skin with varicose veins, rashes, spots, moles (with hairs) or wounds without consulting your doctor first. [. . . ] Protective cover Precision cap (HP 6444) for epilating armpits and bikini line Pain softener (HP 6444) for epilating armpits and bikini line Epilating head with epilating discs Pain softener for epilation of the legs On/off switch with speed selector 0 = off I = normal speed II = high speed Inlet socket for appliance plug Appliance plug Cord Adapter Brush Exfoliating head Using the appliance Make sure your skin is clean, entirely dry and free from grease. Do not use any cream before you start epilating. 4 Switch the appliance on by sliding the on/off switch (F) to the desired speed setting: Select speed I (Fig. 4) for areas with little hair growth and for areas where bones are located directly beneath the skin, such as knees and ankles. 5) for larger areas with stronger hair growth. 5 Stretch the skin with your free hand to make the hairs stand upright (Fig. 6 Place the epilating head (D) perpendicularly onto the skin so that the epilating head (D) and the pain softener (E) are in proper contact with the skin. 7 Move the appliance slowly, with the pain softener (E) pointing forward, against the direction of hair growth. 8 Stretch your leg when you are epilating the back of your knee. Epilating armpits and bikini line (Type HP6444 only) This appliance comes with precision cap (B). This precision cap reduces the number of epilating discs that are active and stretches the skin during epilating. it is particularly suitable when epilating armpits and bikini line. You will get the best results when the hairs are not too long (max. 2 Slide the pain softener for epilating the legs (E) off the appliance with your thumbs (Fig. 3 Fit the pain softener for epilating the armpits and the bikini line (C) onto the appliance (Fig. 11) The precision cap (B) can only be fitted onto the appliance in one way. 6 Stretch the skin with your free hand (Fig. 7 Place the appliance perpendicularly onto your skin, without exerting any pressure (Fig. 8 Make sure both the epilating discs (D) and the pain softener (E) are in proper contact with the skin (Fig. 9 Move the appliance slowly over your skin against the direction of hair growth. Exfoliating (type HP6447 only) Use the exfoliating head only on your legs, not on your armpits or bikini line. 2 Remove the epilating head by pressing the ribbed section and sliding it off the appliance in the direction of the arrow (fig. [. . . ] You can clean the exfoliating head more thoroughly by rinsing it under a running tap (Fig. The exfoliating head can be dried with a towel. Storage 1 Put the protective cover (A) back onto the appliance after use (Fig. 2 Put the appliance and its accessories in the bag supplied with the appliance. [. . . ]