User manual PHILIPS HP-6570 QUICK START GUIDE

[. . . ] Make sure your skin is completely dry when you start epilating. Make sure your skin is clean, entirely dry and free from grease. Do not use any cream before you start epilating. Epilation is easier and more comfortable when the hair has the optimum length of 3­4 mm. [. . . ] On some areas, hair may grow in different directions. In this case, it may be helpful to move the appliance in different directions to achieve optimal results. To relax the skin, we advise you to apply a moisturising cream after epilation. Fine hair that regrows might not grow up to the skin surface. The regular use of an exfoliating sponge or cream (e. During showering) helps to prevent ingrowing hair as the gentle scrubbing action removes the upper skin layer and fine hair can get through to the skin surface. When you use the opti-start cap with massage element, make sure that the massage element always stays in contact with the skin. 2 Remove loose hairs from the attachment with 3 Rinse the opti-start cap with massage element 2 Remove loose hairs with the cleaning 3 Rinse the epilating head under the tap for Dry the epilating head thoroughly with a tea towel. Note: Make sure the epilating head is completely dry before you place it back onto the appliance. Replacement All parts of the appliance can be replaced. If you need to replace one or more of the following parts, go to your Philips dealer or an authorised Philips service centre: - appliance itself - epilating head - opti-start cap with massage element - cleaning brush - adapter Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. Com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country. 2 Insert the adapter into the wall socket. Epilating the legs We advise you to start epilating with the opti-start cap with massage element. The opti-start cap with massage element ensures maximum skin contact and allows you to epilate your legs more quickly and efficiently. If you already have some experience with epilation, you can simply use the epilating head without any attachment. You move the appliance in the wrong direction. You place the epilating head on the skin at the wrong angle. You used a (depilatory) cream prior to epilation. [. . . ] the optimal length for easy removal of the hairs is 3-4mm. The hairs that are not caught during this session will be long enough to be removed when you epilate the next time. You can also try to catch the hairs by moving the appliance across the skin a few more times. If you have connected the epilator to the socket in a bathroom cabinet, you may need to switch on the bathroom light to activate the socket. [. . . ]