User manual PHILIPS HQ100

[. . . ] Do not use attachments or other cleaning solutions not recommended by Philips Electronics North America Corporation. Never place this appliance on a soft surface, such as a bed or a sofa, where solution may spill. [. . . ] Replace top on Cleaning Chamber, making sure that it locks into place by turning clockwise until it "clicks" into place. 6) 9. 9 DO NOT RINSE WITH WATER. 7. Clean heads by pumping the top on the Action Cleaning Chamber for about 30 seconds. After each cleaning, spread one drop of lubricating oil from the tube included, Norelco Razor Lubricant Model AL80, or one drop of mineral oil over each razor head using your finger. 10 11. For consistently close and comfortable shaves, you should clean your razor heads every 4 - 6 weeks or when the display on your razor tells you to do so. If your shave is still not close enough, you may need new replacement heads. 2 3 7 11 12. Change the filter and Action Clean Cleaning Solution at least once a year. Use only Norelco Action Clean Cleaning Solution with filter, model HQ101, with this unit. Replacement Accessories Replacement Accessories may be purchased at an Authorized Norelco Service Location or by using the handy order form enclosed. Razor Head Cleaning Solution and Razor Lubricant: Norelco Action Clean Cleaning Solution, Model HQ101, for use with Action Clean Razor Head Cleaner, model HQ100, only. Not for use with Norelco RAZORMATE Electrosonic Razor Head Cleaner, model ERC100. It is recommended that you change the filter and Action Clean Cleaning Solution at least once a year. Replacement Heads: The self-sharpening rotary blades in your Norelco Razor are precision-made to give closer shaves. [. . . ] Norelco is a Registered Trademark of Philips Electronics North America Corporation. Action Clean is a Trademark of Philips Electronics N. V. [. . . ]