User manual PHILIPS HQ167/3

[. . . ] Your skin may need 2 or 3 weeks to get accustomed to the Philips system. 3 Switch the shaver off by pressing the on/off button once. Put the protection cap on the shaver every time you have used it, to prevent damage. [. . . ] The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water every time you have used the appliance. Always check if the water is not too hot, to prevent your hands from getting burnt. C For easy and optimal cleaning, the Philips Action Clean (shaving head cleaner, type Contact the Customer Care Centre in your country about the availability of this accessory. You can also clean the shaver in the following way: Every day: shaving unit When you clean the appliance, it is not necessary to take the shaving heads (cutters and guards) apart. If you want to take them apart, be sure not to mix up the cutters and guards, since grinding of the cutters in the guards only guarantees optimal performance for each matching set. If you accidentally mix up the sets, it could take several weeks before optimal shaving performance is restored. 1 Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Press the release button (1) and open the shaving unit (2). Clean the shaving unit and the hair chamber by rinsing them under a hot tap for some time. - HQ110 Philips shaving head cleaner (shaving head cleaning spray). If you need information or if you have a problem, please visit the Philips Web site at www. Com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. The shaver has not been rinsed long enough or the water used was not hot enough. Clean the shaver thoroughly before you continue shaving (see chapter 'Cleaning and maintenance'). Unit by Remove the shaving heads from the shaving unit. C Remove the hairs from the cutters and guards with the brush supplied. Do not clean more than one cutter and guard at a time, since they are all matching sets. [. . . ] If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit, press the wheel and turn it clockwise. [. . . ]