User manual PHILIPS HQ177/3P/170

[. . . ] You empty C As soon asgreenstart charging theon. Batteries have C When thepilot light startsbeen fully charged, the green blinking. Whenrunning low, the red pilot light you switch the shaver off, the red pilot light blinks for 4 seconds. Charge the appliance when the red pilot light blinks. [. . . ] Remove the powerplug from the wall socket and pull the appliance plug out of the shaver when the batteries have been fully charged. Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips system. 3 Switch the shaver off by pressing the on/off button once. Put the protection cap on the shaver every time you have used it, to prevent damage. The trimmer can be activated while the motor is running. The easiest and most hygienic way to clean the appliance is to rinse the shaving unit and the hair chamber with hot water every time you have used the shaver. Always check if the water is not too hot, to prevent your hands from getting burnt. Contact the Customer Care Centre in your country about the availability of this accessory. You can also clean the shaver in the following way: Every day: shaving unit and hair chamber Switch the shaver off, remove the powerplug from the wall socket and pull the appliance plug out of the shaver. 5 Put the retaining frame back into the shaving unit, press the wheel (1) and turn it clockwise (2). The following accessories are available: - HQ8000 powerplug. - HQ110 Philips shaving head cleaner (shaving head cleaning spray). Throw the away with the C Do not household appliancethe end of its life, normal waste at but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment. Always remove the battery before discarding the appliance or handing it in at an official collection point. dispose of the battery at an official collection point for batteries. If you have trouble removing the battery, you can also take the appliance to a Philips service centre, which will remove the battery for you and will dispose of it in an environmentally safe way. Only remove the batteries if they are completely empty. 1 Remove the powerplug from the wall socket and pull the appliance plug out of the shaver. Let the shaver run until it stops, open the trimmer, undo the screws and open the shaver. [. . . ] Do not connect the shaver to the mains again after the batteries have been removed. If you need information or if you have a problem, please visit the Philips Web site at www. Com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. [. . . ]